lowering help
anyone no were i can get a cheep lowering kit for a 94 ranger xl..bout 2-3 front. and 3-4 back. thanks
|
try djm suspinsion they ake lowering i beams....lmc truck....but its not gonna be realy cheap cuz your truck has i beams like mine so its gonna be 300 to 600 bucks thats all that ive found anyway there might be cheaper that i havent seen
|
sorry man ur going to have to explian the ake, i beam. lcm, all that shit lol. i think i no the djm. but anyway iv found one for like 5 something but all it showed was coil springs..i got leaf springs in the back..it said it came with a flip kit..im guessing thats for the leaf springs? how does that work? thanks
|
Right now your rear axle sits under the leaf springs. The flip kit places the axle above the springs, thus lowering the rear of the truck the thickness of the rear axle. Make sense? Take a look at an Explorer as they have the springs under the axle.
|
Re: lowering help
ok but will i stil be able to use my truck like a truck?
|
Re: lowering help
what do u use your truck for
|
Re: lowering help
lawns. halling wood. um anything else i might need it for.
|
Re: lowering help
well if your like me when u try to haul wood ur truck is going to ride like crap and bottom out if u go to low that is why i have a 4x4 to use as a truck
|
Re: lowering help
Summit Racing sells lowering kits. 3" front and 4" back. Thats where I got mine from. If the rear is too low for you, you can put on lift shackles to raise it up an inch or so.
|
Re: lowering help
yea well i dont wana go low. just kinda leval it out a lil...wish i had 4x4. and idn man i think a 3 and 4 inch lower is to low.
|
Re: lowering help
Illusive fabrication and design.com has the whole lowering kit for 800.00
|
Re: lowering help
Illusive Design & Fabrications, www.illusivefabrications.com also check out my vendor forums on here for a list of direct links to my ranger products. If you have any product specific questions please feel free to email me brian@illusivefabrications.com for the fastest replys or post up on here or my vendor forums and I will get to them asap.
|
Re: lowering help
ight thanks guys
|
All times are GMT -7. The time now is 08:16 AM. |