Front wheel bearing
How hard is it to swap out on a 4wd Ranger?
|
Re: Front wheel bearing
you have to replace the whole hub assembly...its a sealed unit
|
Re: Front wheel bearing
Quote:
|
Re: Front wheel bearing
buy you a cheap $15 3 finger puller on a scale 1-10 its a 5 took me 30 min
|
Re: Front wheel bearing
Quote:
ryan, front hub bearings are easy. Pull the wheel, remove the brake caliper/cradle assembly, remove the 32mm nut holding the cv axle in the hub, remove the UPPER control arm from the spindle, disconnect your abs wire from the truck (if equipped), pull splined end of cv axle out of hub assembly, remove 3 bolts from back of hub assembly then re-assemble in reverse order. I highly recommend the use of air tools/wd-40 or pb blaster. you'll thank me later. |
Re: Front wheel bearing
i was talking about the front
|
Re: Front wheel bearing
Quote:
|
Re: Front wheel bearing
when the hub will not come off the axle ive had to use one the last time i changed mine.
---------- http://www.fordrangerforum.com/drive...t-get-off.html |
That situation is a rarity, most people never need to go to such great lengths.
Sent from my DROIDX using Tapatalk |
Re: Front wheel bearing
Quote:
|
Re: Front wheel bearing
It's easy as pie if you do it the way Drew mentioned.
|
Re: Front wheel bearing
Its like a FWD car, eh?
|
Re: Front wheel bearing
Quote:
|
Re: Front wheel bearing
Well my truck only has 47k on it..
|
Re: Front wheel bearing
Old one came off in less than 45 minutes, new one will be here Friday. :)
|
All times are GMT -7. The time now is 04:13 PM. |