how to add wheel spacers
so its really basic but i got the wheel spacers in the mail today so i put them on, figured i would write up a lil how to
step one, park truck on flat surface, block the back tires and put the parking brake on step two loosen lugs a turn or so before lifting front end. lift front end and secure with jack stands step 3 remove lug nuts http://i1098.photobucket.com/albums/...8-33-28_53.jpg step 4 take wheels off and slide on wheel spacer step 6 put new bolts onto the lugs making sure the old lugs dont stick out farther than the spacer. step 7 tighten bolts in star pattern as tight as you can, helps to have someone holding the brake to keep the hub from spinning. http://i1098.photobucket.com/albums/...-38-59_911.jpg http://i1098.photobucket.com/albums/...-39-05_468.jpg step 8 put wheel back on and lug nuts on as tight as you can step 9 lower vehicle so that wheel is just touching the ground, and finish tightening lug nuts in a star pattern again. step 10 take it for a spin beware guys spacers arent a good idea, i only got them because the tires rubbed on the frame. also after a few hundred miles take your tires off and check the spacer bolts, then at every tire rotation check to make sure they are tight before: http://i1098.photobucket.com/albums/...-22-56_178.jpg after with 1.25 inch wheel spacers on each side http://i1098.photobucket.com/albums/...-42-12_989.jpg http://i1098.photobucket.com/albums/...-42-18_583.jpg http://i1098.photobucket.com/albums/...-45-14_629.jpg |
Re: how to add wheel spacers
Well do they rub at all?
|
Re: how to add wheel spacers
they only rubbed flexed out and the steering wheel locked, so idk yet, but they shouldnt!
|
Re: how to add wheel spacers
Nice job, Ben! Thanks.
I would add looking up the torque specs for your truck and the spacer too. Use a torque wrench on the final tightening. Lug torque should be checked again after 50? miles. |
Re: how to add wheel spacers
psh that stuff is for people with fancy torque wrenches, i have basic hand tools lol, i know its not the right answer but its the only one i've got. ill be down at my dads this weekend so im gonna rotate the tires and check the spacers, ill torque em at his house.
|
Re: how to add wheel spacers
i think u should space the back too just to get them matched up
|
Re: how to add wheel spacers
its pretty close now, but if randy still wants to get rid of his, then i will.
|
Re: how to add wheel spacers
I'm 49 and just bought a torque wrench a few months ago...
Daddy has one I used;) |
Re: how to add wheel spacers
i have an old style one with the meter on it, but they arent accurate at all, i figure if i get them as tight as i can they will be fine for now.
|
Re: how to add wheel spacers
Just words of caution...
Overtightened bolts/nuts/lugs can and will stretch the bolt, deform the threads and weaken the fastener. |
Re: how to add wheel spacers
yeah this is true, but hand tightening with nothing but a lug wrench i should be ok.
|
Re: how to add wheel spacers
i would really wanna get these cus i love the stance but id rather not replace things constantly, looks good tho!
|
Re: how to add wheel spacers
haha so i have a torque wrench, but its so old that theres no gauge on it
|
Re: how to add wheel spacers
Looks real good Ben!
I think all four should be fitted |
Re: how to add wheel spacers
Keep us posted on how long the wheel bearings hold up. I've always heard it puts an offset load on them.
|
All times are GMT -7. The time now is 01:54 AM. |