Sticks-2003 Ranger Edge
Figured i'd do one of these project logs myself since it seems my ideas for mods grows quite a bit each month.lol.
Here's a dealer photo of my truck before I got it. http://i54.tinypic.com/2567l2o.jpg First mod was to remove the tonneau cover. http://i55.tinypic.com/2llks9x.jpg Next mod was to paint the faded honeycomb grille with Krylon Fusion satin black. http://i55.tinypic.com/20gfxo7.jpg After: http://i55.tinypic.com/kw76r.jpg Then came the bed caps from 01DangerRanger and the step bars that I got from Bisket4x4. He got my old chrome ones, I got his old factory black ones. http://i55.tinypic.com/2eltgjo.jpg http://i51.tinypic.com/2is9t6v.jpg Then the factory privacy slider I picked up for $27. Still have yet to put this in though. Will update when I do. http://i53.tinypic.com/nf4d92.jpg Then came a transmission filter and gasket change due to a bad gasket. I think this picture demonstrates the importance of changing your trans filter. My truck had 46,000 miles when this picture was taken. The new trans filter had a yellow filter material. As you can see, the old one is already dirty, even after such low mileage. http://i55.tinypic.com/21cuwlk.jpg Then some pic whoring. http://i54.tinypic.com/10x9e81.jpg |
Re: Sticks-2003 Ranger Edge
very nice, now update this son' bitch
|
Re: Sticks-2003 Ranger Edge
needs more lift. lol
|
Re: Sticks-2003 Ranger Edge
Quote:
---------- Quote:
I do plan to get new rear blocks from a 4x4 if they are indeed different, and then a T-bar crank, and then eventually 16" Fx4's, so it'll definitely go a little taller than it is now. ----------- Update: New Goodyear Wrangler RT/S 235/75/15, same tires as the truck originally had on it, but new. :) http://img6.imageshack.us/img6/9171/picture131iz.jpg http://img171.imageshack.us/img171/9...cture140nv.jpg And finally, the rear slider. http://img841.imageshack.us/img841/6...cture167bu.jpg |
Re: Sticks-2003 Ranger Edge
man that bed looks clean and no scratches lol
|
Re: Sticks-2003 Ranger Edge
Quote:
|
Re: Sticks-2003 Ranger Edge
i like the sliding window in the back .. how did you put that in? any extra hardware compared to the stock window. i ant to do the same thing
|
Re: Sticks-2003 Ranger Edge
Quote:
|
Re: Sticks-2003 Ranger Edge
|
Re: Sticks-2003 Ranger Edge
how hard was transmission filter
|
Re: Sticks-2003 Ranger Edge
SHAUN
you need to update this thread more kthanksbye |
Re: Sticks-2003 Ranger Edge
^ I can do that.
Grabber Blue Edge decals: http://imageshack.us/a/img809/1998/picture812w.jpg Torsion Bar crank: http://imageshack.us/a/img820/2702/picture810v.jpg New Factory Bed Liner: http://imageshack.us/a/img59/2385/picture834d.jpg 4x4 Decal: http://imageshack.us/a/img607/276/picture882r.jpg I've also tinted the front two windows to 20%, but I don't have pics yet. The next two mods I plan to do are #1 T-Bars, and an add-a-leaf for the rear. Once those are done, I plan to try and find new wheels so that I can get new tires and an alignment. Once those are done, then I can start focusing on other things, like maybe paying this damn thing off. :) |
Re: Sticks-2003 Ranger Edge
lol i can do that....... 13 months later looking good though!
|
Re: Sticks-2003 Ranger Edge
Quote:
Now gimme dat cargo extender and factory bedliner!!!! Lol |
Re: Sticks-2003 Ranger Edge
Quote:
You can have the cargo extender if you pay for my Add-A-Leaf, and drive down here to trade. |
All times are GMT -7. The time now is 08:15 PM. |