Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Ford Ranger Forum - Forums for Ford Ranger enthusiasts! (http://www.fordrangerforum.com/)
-   Project Logs (http://www.fordrangerforum.com/project-logs/)
-   -   Sticks-2003 Ranger Edge (http://www.fordrangerforum.com/project-logs/30476-sticks-2003-ranger-edge.html)

Fordzilla80 04-03-2011 06:00 PM

Sticks-2003 Ranger Edge
 
Figured i'd do one of these project logs myself since it seems my ideas for mods grows quite a bit each month.lol.

Here's a dealer photo of my truck before I got it.

http://i54.tinypic.com/2567l2o.jpg

First mod was to remove the tonneau cover.

http://i55.tinypic.com/2llks9x.jpg

Next mod was to paint the faded honeycomb grille with Krylon Fusion satin black.

http://i55.tinypic.com/20gfxo7.jpg

After:

http://i55.tinypic.com/kw76r.jpg

Then came the bed caps from 01DangerRanger and the step bars that I got from Bisket4x4. He got my old chrome ones, I got his old factory black ones.

http://i55.tinypic.com/2eltgjo.jpg

http://i51.tinypic.com/2is9t6v.jpg

Then the factory privacy slider I picked up for $27. Still have yet to put this in though. Will update when I do.

http://i53.tinypic.com/nf4d92.jpg

Then came a transmission filter and gasket change due to a bad gasket. I think this picture demonstrates the importance of changing your trans filter. My truck had 46,000 miles when this picture was taken. The new trans filter had a yellow filter material. As you can see, the old one is already dirty, even after such low mileage.

http://i55.tinypic.com/21cuwlk.jpg

Then some pic whoring.

http://i54.tinypic.com/10x9e81.jpg

2004xlmiller 07-02-2011 12:30 AM

Re: Sticks-2003 Ranger Edge
 
very nice, now update this son' bitch

DiabloBlanco 07-02-2011 10:24 AM

Re: Sticks-2003 Ranger Edge
 
needs more lift. lol

Fordzilla80 07-03-2011 03:51 PM

Re: Sticks-2003 Ranger Edge
 
Quote:

Originally Posted by 2004xlmiller (Post 472231)
very nice, now update this son' bitch

Thanks! lol. I only have the slider mod update. That and new tires. I want Fx4 rims but I'm too broke at the moment. :(

----------

Quote:

Originally Posted by DiabloBlanco (Post 472443)
needs more lift. lol

Don't remind me. :/

I do plan to get new rear blocks from a 4x4 if they are indeed different, and then a T-bar crank, and then eventually 16" Fx4's, so it'll definitely go a little taller than it is now.


-----------

Update:

New Goodyear Wrangler RT/S 235/75/15, same tires as the truck originally had on it, but new. :)

http://img6.imageshack.us/img6/9171/picture131iz.jpg

http://img171.imageshack.us/img171/9...cture140nv.jpg

And finally, the rear slider.

http://img841.imageshack.us/img841/6...cture167bu.jpg

Demon-FX4 07-03-2011 05:16 PM

Re: Sticks-2003 Ranger Edge
 
man that bed looks clean and no scratches lol

Fordzilla80 07-04-2011 08:21 PM

Re: Sticks-2003 Ranger Edge
 
Quote:

Originally Posted by Demon-FX4 (Post 473541)
man that bed looks clean and no scratches lol

That's the only other thing tonneau covers are good for. It has some scratches between the cargo extender and tailgate, but that's about it. The whole area was immaculate when I bought the truck. Whenever I get my drop in liner, you better believe that any and all areas of contact will have foam pads to keep the liner from scratching the bed. Oh, and the liner will be super ultra mega sealed as well. :D

dunc2005 10-12-2011 06:10 AM

Re: Sticks-2003 Ranger Edge
 
i like the sliding window in the back .. how did you put that in? any extra hardware compared to the stock window. i ant to do the same thing

Fordzilla80 11-21-2011 07:03 PM

Re: Sticks-2003 Ranger Edge
 
Quote:

Originally Posted by dunc2005 (Post 583954)
i like the sliding window in the back .. how did you put that in? any extra hardware compared to the stock window. i ant to do the same thing

Whoops, missed this post. No extra hardware needed at all, all you need is a new seal and the sliding window and you'll be good to go.

Fordzilla80 01-03-2012 12:24 PM

Re: Sticks-2003 Ranger Edge
 
:)


http://img69.imageshack.us/img69/8449/picture483b.jpg

Eagle 02-07-2012 03:23 PM

Re: Sticks-2003 Ranger Edge
 
how hard was transmission filter

Yeller 02-15-2012 06:32 PM

Re: Sticks-2003 Ranger Edge
 
SHAUN

you need to update this thread more

kthanksbye

Fordzilla80 04-01-2013 08:40 PM

Re: Sticks-2003 Ranger Edge
 
^ I can do that.

Grabber Blue Edge decals:

http://imageshack.us/a/img809/1998/picture812w.jpg

Torsion Bar crank:

http://imageshack.us/a/img820/2702/picture810v.jpg

New Factory Bed Liner:

http://imageshack.us/a/img59/2385/picture834d.jpg

4x4 Decal:

http://imageshack.us/a/img607/276/picture882r.jpg

I've also tinted the front two windows to 20%, but I don't have pics yet.

The next two mods I plan to do are #1 T-Bars, and an add-a-leaf for the rear. Once those are done, I plan to try and find new wheels so that I can get new tires and an alignment. Once those are done, then I can start focusing on other things, like maybe paying this damn thing off. :)

RagerTom 04-01-2013 08:45 PM

Re: Sticks-2003 Ranger Edge
 
lol i can do that....... 13 months later looking good though!

Yeller 04-01-2013 08:49 PM

Re: Sticks-2003 Ranger Edge
 
Quote:

Originally Posted by Fordzilla80 (Post 1338416)
^ I can do that.

Grabber Blue Edge decals:

http://imageshack.us/a/img809/1998/picture812w.jpg

Torsion Bar crank:

http://imageshack.us/a/img820/2702/picture810v.jpg

New Factory Bed Liner:

http://imageshack.us/a/img59/2385/picture834d.jpg

4x4 Decal:

http://imageshack.us/a/img607/276/picture882r.jpg

I've also tinted the front two windows to 20%, but I don't have pics yet.

The next two mods I plan to do are #1 T-Bars, and an add-a-leaf for the rear. Once those are done, I plan to try and find new wheels so that I can get new tires and an alignment. Once those are done, then I can start focusing on other things, like maybe paying this damn thing off. :)

Finally! Damn!


Now gimme dat cargo extender and factory bedliner!!!! Lol

Fordzilla80 04-01-2013 08:58 PM

Re: Sticks-2003 Ranger Edge
 
Quote:

Originally Posted by OlYeller (Post 1338443)
Finally! Damn!


Now gimme dat cargo extender and factory bedliner!!!! Lol

I'm planning on taking some new pictures of the truck tomorrow, since it appears I haven't done so since last September.

You can have the cargo extender if you pay for my Add-A-Leaf, and drive down here to trade.


All times are GMT -7. The time now is 05:32 AM.