Engine code p0340
I got a check engine light, and the code is p0340, the cam position sensor. Went to buy a new sensor from 2 different parts stores, and am getting the run around, because they keep giving me the wrong sensor. The sensor they gave me is for the 3 litre, and they keep telling me it' s for the 4 litre as well, but the sensor looks way different, and the electrical connectors won't plug into each other if any one knows the part number for the cam sensor for the 4 litre engine, I would really like to know so I can get the right sensor, thanx.
|
Re: Engine code p0340
Ford oem part number
12k073 |
Re: Engine code p0340
what does the connector look like? auto zone is showin a 3 wire flat sensor. http://i1237.photobucket.com/albums/...ianr1013/2.jpg
is this what u have or is this the wrong 1 u keep getting? |
Re: Engine code p0340
Is this were your looking at the cam sensor on the engine? toward the firewall? And does your engine really look like it's made of playdo?
http://i608.photobucket.com/albums/t.../138686431.jpg |
Re: Engine code p0340
That's the sensor that Lordco gave me, but the sensor I need has the 3 pin connector@ a right angle pointing up, so the wiring harness plugs down into connector. Here is a link to a picture. http://www.therangerstation.com/foru...&pictureid=632
---------- Thanx DiabloBlanco, I'll give them that part number, and hopefully it's the right one. |
Re: Engine code p0340
|
Re: Engine code p0340
That link you sent , to the sensor, shows the whole synchro assembly, do you know if I can get just the sensor, or do I have to replace the whole synchro?
|
Re: Engine code p0340
Im sure you can get the sensor by itself. But its a very rare thing to find.
|
Re: Engine code p0340
Thanks for the help Diablo.
|
Re: Engine code p0340
No problem, hope the issue gets fixed!
|
All times are GMT -7. The time now is 07:08 AM. |