Expo visor wiring? Also Mustang dome wiring?
 

Yes, I searched high and low but can't find a how-to for where to tap the expo lighted visors for my 98 Mazda. Seems simple, but curious as to "best" (or even simplest) power splice-in short of running it to the battery.

Also the Mustang dome lights; lots for 2004 on up but nothing for us old schools. The stang lights have the three wire connector and mine has the two wire (plus ground to frame?). Just splice the connector to the existing wires and run a separate ground to the frame?

Thanks in advance for the advice!

MadMaz for more light on the subject

Re: Expo visor wiring? Also Mustang dome wiring?
 

http://www.fordrangerforum.com/how-s...light-mod.html

the mirrors have been covered as well, but you just tap into the constant 12v at the dome light or ohc if you have one.

Re: Expo visor wiring? Also Mustang dome wiring?
 

Thanks drppdyllwrngr; found the 'stang dome just screws in using all three long screws. No time to wire the visor lights just yet; will try to do it all at once when I add the OHC.

Hey, even the wife likes these mods -so far the ONLY mods on this truck she likes...

MadMaz: the few, the proud, the MazdoFord