Need an A-Arm (torsion bar) 4wd truck in So Cal for prototyping
 

Going to start making a new goody for rangers and want to make sure it will fit on both 2wd and 4wd trucks. If you have an A arm 4x4 ranger in southern california and want a CHEAP (pay for materials) mod, let me know!

Re: Need an A-Arm (torsion bar) 4wd truck in So Cal for prototyping
 

you might talk to dabiskit he is in nor cal but has a parts truck. and he is building a 4x4, might be game.

Re: Need an A-Arm (torsion bar) 4wd truck in So Cal for prototyping
 

id be so down! but im in nor cal and i have torsion bars

Re: Need an A-Arm (torsion bar) 4wd truck in So Cal for prototyping
 

I am new here but depending on what the mod is I might be interested. North end of LA county. So not to far away, PM me!

Re: Need an A-Arm (torsion bar) 4wd truck in So Cal for prototyping
 

You are also 2wd ;)

Will do

Re: Need an A-Arm (torsion bar) 4wd truck in So Cal for prototyping
 

true...dammit lol i thought the edge was basically the same set up minus the actual 4 wheel drive parts

Re: Need an A-Arm (torsion bar) 4wd truck in So Cal for prototyping
 

I need to check clearance on the 4wd parts.

Re: Need an A-Arm (torsion bar) 4wd truck in So Cal for prototyping
 

Do you need upper control arms? I saved both of my old ones.

Re: Need an A-Arm (torsion bar) 4wd truck in So Cal for prototyping
 

Nope, need to check front driveshaft clearance

----------

Also might be interested in a 2wd edge that is stock and hasn't been offroad/abused yet