Speaker magnet very close to back of cab
Ok, here's the situation....
I recently installed some 6x8 pioneers in the doors and rear of my single cab. My dilemma is that I am going to put some dynamat in the rear cab...the only problem is that right now, the back of the speaker magnet almost touches the back of the cab. I feel that if I put the dynamat in behind it, that the back of the speaker magnet will touch the dynamat and cause the whole back cab to vibrate or cause an issue. I dont want the back of the speaker touching anything. Is that a common issue? I saw one guy put some electrical tape behind the speaker to touch the speaker...but it seems like I said earlier..which would cause more vibration since the speaker is actually flush with the back of the cab instead of having at least a 1/4 inch gap. What do you guys think? Any experience here on this? |
Re: Speaker magnet very close to back of cab
i'm courious about this, i have speakers in the back, and it rattles like a mofo with no dynamat
|
Re: Speaker magnet very close to back of cab
can you make a 1/4" or so shim to pull the speaker out and still get the grill back on?
|
Re: Speaker magnet very close to back of cab
Put the Dynamat behind it and put it in. It'll be fine.
|
Re: Speaker magnet very close to back of cab
Quote:
---------- Quote:
|
All times are GMT -7. The time now is 09:09 PM. |