Need help with dome light
My dome light is staying on. Well I took the bulbs out, but I have put in the ohc today and wanted to finish connecting everything but the dome light just stays on.
Is this something with the dome ligh board? or is the power cut on/off at the wire? Right now I have the ohc wired to the wires for the dome light, I just have the one pwr wire unhooked and am using the lamp button on the ohc to use the light as of right now, but it would be nice if the light came on when the door is open also, i really dont care about the original dome light. if there is a way to bypass it or not. |
Re: Need help with dome light
Have you tried the "spray a bunch of wd-40 in the door switch & slam it a few times" trick yet?
|
Re: Need help with dome light
Quote:
|
Re: Need help with dome light
possibly your (i believe magnesium) door switch which senses the door being opened or closed. i replaced mine and haven't had that problem again
|
Re: Need help with dome light
I guess I didn't know about the door switch, were is it exactly. how would 1 replace it?
---------- never mind, I found the how to guide on here for it, I will try. |
Re: Need help with dome light
Quote:
this is the assembly here, http://i26.photobucket.com/albums/c1...c/PC170073.jpg and this is what the actual switch looks like. (under my thumb) http://i26.photobucket.com/albums/c1...c/PC170072.jpg i had my light come on a few years back and it wouldnt shut off and while talking to ford they told me the switch isnt serviceable and i had to replace the entire assembly so i did only to have the interior light come back on a month or so later, after some reading online i came across the WD-40 trick so i tried it and it worked and the light has stayed off since. |
Re: Need help with dome light
well if it comes to replacing the switch the hell with it, I'll just push the damn button! lol
|
Re: Need help with dome light
Does it stay on AFTER you hooked up the OHC?
|
Re: Need help with dome light
Quote:
all tho now, im not getting anything at all, it must be the switch |
All times are GMT -7. The time now is 02:07 AM. |