93 ranger amp
Is there a specific fuse for this in the fuse panel or in the amp
replaced oem radio with another and no sound? |
I really don't understand what you are asking, but am posting because I believe I can help. Do you think you could rephrase what you are asking and maybe use periods or commas?
If you are asking for a fuse for an aftermarket amp: No, you ussualy buy a wiring kit that has a fuse and install the fuse close to the battery. Then you run the wire through the firewall and to your amp. I think you are asking more than just this one question, but I cannot tell because you only used one punctiation mark. If you can make it clear what you are asking, many of guys here can help. |
If this is a aftermarket amp the fuse like the guy above said will be around the battery
As far as I knew there were no factory amps in rangers till the Tremor came out |
I'm refering to the factory amp for a premium sound stereo
|
I'm pretty sure it the JBL setup.
|
the amp is tucked behind the passenger side kick panel
there should be a factory bypass harness in the dash its stuffed down a lil bit in the dash There is suppose to be a kit you can buy to make a aftermarket stereo work with this factory amp One kit I found online was called Scosche FDK2B Kit |
All times are GMT -7. The time now is 12:57 AM. |