4/5 drop
if i am wanting to do a 4/5 drop will i have to buy anything special or can i just cut the coil springs and put the leaf under the axle.
|
Re: 4/5 drop
You would need a set of DJM 3" drop Ibeams and a set of ranger splash coils for the front and a flip kit and 1" block for the rear to do it the right way. Some good Doetsch Nitro Slammer drop shocks would also be a good idea. Your other option would be the DJM beams, Belltech 2" drop coils (splash coils are 1" shorter) and a rear flip kit and flip the rear hangers and shackles for a 5/6 drop. All parts available through the web site in my signature.
|
Re: 4/5 drop
hey man were do i find the 1'' block and ranger splash coils i looked on that site in your signature just dont wanna buy the wrong stuff thanks
|
Re: 4/5 drop
I still need to add the lowering blocks to my site, as for the splash coils you will need to check with a ford dealer or junk yard probably.
|
Re: 4/5 drop
i got everything thanks bro i will i be ordering from your site soon
|
Re: 4/5 drop
i had a 95 b4000 that i lowered all i did was i flipped the axel in the rear and i heated the coils in front, the front had alot of negative camber cause of the stock beams but it handled like a dream
|
Re: 4/5 drop
how would you go about cutting to coils? i know it's better to get the drp beams but i'm broke, you can only cut 1 to 1.5 coils right?
|
All times are GMT -7. The time now is 01:50 PM. |