Issue with lights morning after severe rainfall
Greetings,
This is my first post so please bear with me. Original owner of 2010 Ranger Sport supercab W/4.0 and manual trans. No electrical mods whatsoever other than HID's installed in 2010 (And have since been isolated/disconnected in order to try and resolve this problem). Over the course of Monday night, there was a severe downpour. I woke up Yesterday morning and upon starting the truck to go to work, I realized that I had no headlights, running tail lights or dash cluster lights (All guages and trouble lights appear to work). Dome light and brake lights work. The factory radio would not turn on and the clock was not displayed on the screen. I had no choice but to head out. A short while down the road, the radio would begin to strobe green on and off sporadically, and eventually at more of a constant. I tried to flip the lights back on, and the radio would stop strobing and no still lights. Upon testing the fogs, they would flicker on and off but eventually stay off. I have so far removed the HID's and put back the oem bulbs. I have verified 14.3V at the battery while idling. I have tested all of the fuses. I have searched high and low for any sign of water infiltration in the cab and in any fuse boxes without success. Not sure where to turn at this point. Can someone comment if they know what all of the symptoms/failures have in common?...Perhaps a module that impacts power to the radio, running lights, dash lights and headlights? Blower, wipers, flashers and brake lights all work. I'd really appreciate anyone who has seen this before chime in. Thank-you!!! |
Re: Issue with lights morning after severe rainfall
Quote:
I do not have a fuse box on the LH side. There is one on the passenger side kick panel and one under the hood. No sign of infiltration whatsoever. |
Re: Issue with lights morning after severe rainfall
Quote:
You are going to have to look for a FSM for the wiring diagrams for that year truck to simplify things. EDIT:: I think the rain was just a coincidence unless you have a open circuit to ground in a trailer harness out back possibly but that would only affect the running lights. Something that drops power to all of what you say is a power fuse through the firewall. |
Re: Issue with lights morning after severe rainfall
https://ibb.co/gOdwaz
Good morning!....After disconnecting the old SJB connectors, this is what I saw. I figured I had isolated my issue. I had little choice but to buy a new one. Unfortunately upon installing and reconnecting the new unit, the problem persists...I am now thinking that the female connectors need to be cleaned somehow...Does anyone have any suggestions on the best way to do this? Thanks again! ---------- https://ibb.co/gOdwaz ---------- https://ibb.co/gOdwaz Here is the old SJB |
Re: Issue with lights morning after severe rainfall
The link let me open the existing panel with the corrosion but the other pics did not display, maybe a new user restriction...
You can get a product called deoxit to use along with the aerosol electronics cleaner and maybe use something like the end of a toothpick to agitate the surfaces. I think it would be worth while to either rob or buy a good connector. The actual metal part of the connectors/pins can be removed from the plastic shell to either facilitate cleaning or replacement of the individual pins but it's a tedious process... |
Re: Issue with lights morning after severe rainfall
Thanks for all of the help here folks. The problem ended up being a short in the wiring harness under the hood. Purely coincidence it came out the morning after sever rain and that the sjb was corroded.
|
Re: Issue with lights morning after severe rainfall
good to hear
|
All times are GMT -7. The time now is 01:57 PM. |