body mounts
 

well the cab mounts on my 1990 rangerext cab are being a pain in the ass to get out ive tried everything i can think of to get them out its the style of mount where the bottom cushion retainer slips into the upper cushion retainer and im having a hell of a time getting the front passenger side one out so if yall have any tricks or tips it would be much appreciated

i got the back passenger side one out by threading a spare bolt in backwards then hitting it from the top inside the cab

Re: body mounts
 

heres a picture of what im talking about style wise
http://image.off-roadweb.com/f/85696..._cab_mount.jpg

Re: body mounts
 

yea thats what i mostly done i lifted my cab just enough to cut the rubber bushings on my truck and get the weight off them. then i got inside the cab with a old rod that fits in the hole and beat the shit out of it and when they finally come out i just bought new ones from LMC Truck cause it messes them up

Re: body mounts
 

yeah im gonna try and get one from my donor truck out intact i already got the back one out easily im just gonna cut out the frount one probably if i can get one from the donor truck out intact lmc takes to long last time i ordered something it took like 2 weeks for it to show up

Re: body mounts
 

alright i found a way to get them out , you cut out the bottom rubber biscuit and then shove a ball joint fork in there then jack the end of the fork upward and once its level hit it towards the cab with a hammer it may take a bit but it gets the job done

and this nightmare is offically behind me! good thing i got polyurethane bushings hopefully ill never have to do this again haha