Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Ford Ranger Forum - Forums for Ford Ranger enthusiasts! (http://www.fordrangerforum.com/)

- Electrical Tech (http://www.fordrangerforum.com/electrical-tech/)

- - I thought I was the Man. (http://www.fordrangerforum.com/electrical-tech/14065-i-thought-i-was-the-man.html)

tonycasarano

07-04-2010 05:27 AM

I thought I was the Man.

I replaced the airbags and module in my '03 ranger but the light still blinks. One flash, a pause and then nine flashes. Does anyone know what it is or how to fix it? At this point I just want the light out.

Clinton

07-04-2010 05:46 AM

Re: I thought I was the Man.

mine did the same thing, disconnect the wire harness under each seat, spray wd40 in it and reconnect it. cured my problem

drppdyllwrngr

07-04-2010 06:51 AM

Re: I thought I was the Man.

Quote:

Originally Posted by Clinton (Post 149052)

mine did the same thing, disconnect the wire harness under each seat, spray wd40 in it and reconnect it. cured my problem

you are talking about a code 26 or 27. Or something close to that.

OP, I found this on another forum. Maybe it will help.

Quote:

Code 19 means the crash sensor is full and needs to be replaced. On a ranger it is under the front console (on the floor) below the radio. It's about a $200 part & will reset itself once you replace it. (Please disconnect the battery if you are going to work on airbag systems)

STL	07-04-2010 07:04 AM

Re: I thought I was the Man.

I dont think the airbag module is his problem. I have to agree with Clinton on it being the sensor under the seat.

Here is the airbag module. I posted this yesterday
http://i50.tinypic.com/dz9z89.jpg

drppdyllwrngr

07-04-2010 08:32 AM

Re: I thought I was the Man.

Quote:

Originally Posted by STL (Post 149080)

I dont think the airbag module is his problem. I have to agree with Clinton on it being the sensor under the seat.

I don't know for a fact, but if the code is flashing a 19, it would be hard to argue it. cleaning the connections under the seats would be an easy thing to do.

tony, where did you get the module? possible it was in an accident before?

All times are GMT -7. The time now is 04:42 PM.