Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Ford Ranger Forum - Forums for Ford Ranger enthusiasts! (http://www.fordrangerforum.com/)
-   Fabrication and Tool Tech (http://www.fordrangerforum.com/fabrication-and-tool-tech/)
-   -   Custom gauge cluster (http://www.fordrangerforum.com/fabrication-and-tool-tech/134767-custom-gauge-cluster.html)

Dang3rRang3r 02-19-2016 11:01 PM

Custom gauge cluster
 
All of my gauges are out except for the speedo. I wanted to see if there is any places out there that would be able to make a gauge cluster to fit in original dash location bit use aftermarket digital round gauges. Any help would be great.

Cptspock01 02-20-2016 09:31 AM

Re: Custom gauge cluster
 
I want to do the same, wanting to swap out gauges from an expo cluster

idahoRedRanger 10-23-2016 04:50 PM

Re: Custom gauge cluster
 
I was thinking on making a digital one, but everyone hated the idea and bashed it for some reason so I just forgot about it really. Although I wouldn't really know where to start.

smokinAMD 10-29-2016 06:13 AM

Re: Custom gauge cluster
 
A couple people have done it. Basically just gutted a stock cluster case, glued in a flat piece of plastic and used a hole saw to make the holes for the new gauges.


All times are GMT -7. The time now is 01:57 AM.