FAST Fabrication 94 b4000 turn into SNORE class 7 race truck
This is our first full truck build, my brothers 2001 HnM prerunner we have done bumpers and bed cage and glass install on it. We do trailer work, upholstery, and all kinds of metal fab work.
So it started out as a extended cab 1994 Mazda B4000, for years I had 33s and a front clip and 6" bedsides on it with no suspension because the front was in an accident. Two months before the full build I had installed an extended beam kit with coil buckets, a 8.8 rear-end (now in brothers truck) and made the front clip tilt. Then we gutted the entire truck, I have so much for sale from electrical stuff, to panels, to gas tank, etc. Cut the back of the Cab off and here is/was the plans: -2" d.o.m. main cab cage with 1 3/4 d.o.m. support tubes and throughout back half and engine cage -Equal length front d44 boxed beam kit with crossover steering strapped at 20" -GMR boxed race links, with GMR fully trussed 3.5" housing -Scheiner Enterprises 2.5" full floater hubs, Wilwood 4 piston calipers and rotors -35 spline 4340 Superior axles, strange light weight spool, 5:43 ring and pinion, billet nascar pinion support, 1350 yoke, Currie 9 plus race nodular -All four corners have 2.0 by 4" bumps, 2.5" dual rate coilovers, and 2.5" triple bypasses, 2 quad limit straps with clevis -Jaz 32 gallon jeepspeed fuel cell -Built a Wishbone for 3-link -Grade 8 hardware through out with Fk heims and spacers -10" flat top bedsides 2005 and newer ranger front clip - 2 suspension seats with 3" 5 point harness -Built Custom steering column with quick disconnect -Built removable spare tire setup -4 led light box -5 kmc enduro bead locks on 35" wheels 5x5.5 -battery box in rear with dual yellow tops -and much more I like to give a special thanks to our current sponsors, their product has been amazing and their help has been superb. We can get you any of their products as well. FK Bearing (fkrodends.com): supplied us with all of our heims JMX series, high mis-align spacers, uniballs and cups, bungs, and jam nuts G Machine Racing (thegmr.com): Owner Jason Heard has been so helpful in setting up his 3 link boxed links as well as making us a second housing for the bigger hubs Sway-A-Way (swayaway.com) supplied all our shocks 4- 2.0 by 4" bumps, 2-2.5 by 14" coilovers, 2-2.5 by 16" coilovers, 2-2.5 by 16" triple bypasses, and 2-2.5by 18" triple bypasses Glassworks Unlimited (glassworksunlimited.com) supplied their new 2005 ultimate 85" wide ranger clip and their big boy 10" flat top bedsides Vision X Off-road (visionoffroad.com) will be supplying 5 of their H.I.D.s and 3 of their big Halogens Suspension Spring Specialists (bluecoilspring.com) supplied their Blue Coil springs powder coated black giving the truck a perfect stance at ride height PRP Seats (prpseats.com) supplied two of their completion seats, 2 of their 3" 5 point harnesses, 4 coilover covers, and two custom window nets Optima Batteries supplied the two yellow top batteries and of course F.A.S.T. Industries with the divisions of FAST Fabrication, TEAM FAST Racing, and soon FASt Apparel and FAST Media & Web Development will post pics tomorrow i have lots here is a teaser of where its at now http://i54.photobucket.com/albums/g1...scheme1top.jpg http://i54.photobucket.com/albums/g1...intscheme1.jpg http://i54.photobucket.com/albums/g1...r_34/018-3.jpg http://i54.photobucket.com/albums/g1...r_34/024-2.jpg http://i54.photobucket.com/albums/g1...r_34/032-1.jpg http://i54.photobucket.com/albums/g1...r_34/028-1.jpg http://i54.photobucket.com/albums/g1...k/Zi6_0269.jpg |
Re: FAST Fabrication 94 b4000 turn into SNORE class 7 race truck
dude all i can say is sickkkkkkkkkkkkk
|
Re: FAST Fabrication 94 b4000 turn into SNORE class 7 race truck
ill post a lot more pics tonight... I have full build threads on DR and Race Dezert but decided to post on more sites for sponsors and to expand our company. Ill post some pics of the A-Arm ranger to
Also if any of you guys use the harbor freight jack or any kind of aluminum jack we make skids to mount them in the back of your truck. They go from 30-50 depending on what you want if you want dimpled, welded or press break tabs, and if you want to be able to bolt it on or just weld it on. |
Re: FAST Fabrication 94 b4000 turn into SNORE class 7 race truck
If anyone can do my photoshop stuff I need done because im new at it and I can make it look like a real paint job ill send them a free jack skid or 7/8 jmx heim
|
Re: FAST Fabrication 94 b4000 turn into SNORE class 7 race truck
how it look before we gutted it to build a race truck
http://i54.photobucket.com/albums/g1...sengerside.jpg http://i54.photobucket.com/albums/g1...r_34/front.jpg http://i54.photobucket.com/albums/g1...cer_34/1-1.jpg http://i54.photobucket.com/albums/g1...4/100_0432.jpg After I primer cab and did extended beam kit, 8.8 rear end, and flip hood mount http://i54.photobucket.com/albums/g1...4/100_0490.jpg http://i54.photobucket.com/albums/g1...4/100_0504.jpg http://i54.photobucket.com/albums/g1...4/100_0524.jpg http://i54.photobucket.com/albums/g1...4/100_0522.jpg http://i54.photobucket.com/albums/g1...4/100_0556.jpg http://i54.photobucket.com/albums/g1...4/100_0554.jpg http://i54.photobucket.com/albums/g1...4/100_0547.jpg http://i54.photobucket.com/albums/g1...4/100_0544.jpg http://i54.photobucket.com/albums/g1...4/100_0543.jpg http://i54.photobucket.com/albums/g1...4/100_0542.jpg |
Re: FAST Fabrication 94 b4000 turn into SNORE class 7 race truck
damn! thats awesome!
|
Re: FAST Fabrication 94 b4000 turn into SNORE class 7 race truck
uh, pic fail? i want to see this!
|
Re: FAST Fabrication 94 b4000 turn into SNORE class 7 race truck
Quote:
|
Re: FAST Fabrication 94 b4000 turn into SNORE class 7 race truck
|
Re: FAST Fabrication 94 b4000 turn into SNORE class 7 race truck
adding a bunch more pics of the build right now
|
Re: FAST Fabrication 94 b4000 turn into SNORE class 7 race truck
Went in like this
http://i54.photobucket.com/albums/g1...4/DSCF0483.jpg Add 400 ft of metal http://i54.photobucket.com/albums/g1...100_0669-1.jpg http://i54.photobucket.com/albums/g1...100_0670-1.jpg Cut back off first http://i54.photobucket.com/albums/g1...4/DSCF0004.jpg Started with a 2” dom main cab cage and 1 ¾ supports welded to the frame http://i54.photobucket.com/albums/g1...4/DSCF0191.jpg http://i54.photobucket.com/albums/g1...DSCF0193-1.jpg http://i54.photobucket.com/albums/g1...4/DSCF0196.jpg http://i54.photobucket.com/albums/g1...DSCF0202-1.jpg http://i54.photobucket.com/albums/g1...DSCF0211-1.jpg http://i54.photobucket.com/albums/g1...4/DSCF0190.jpg http://i54.photobucket.com/albums/g1...DSCF0189-1.jpg Cut roof to fully weld tube http://i54.photobucket.com/albums/g1...4/DSCF0249.jpg http://i54.photobucket.com/albums/g1...4/DSCF0660.jpg Went through back and made first part of frame to where housing would hit metal, with 2” and 1 3.4 (old housing in pic) http://i54.photobucket.com/albums/g1...4/DSCF0250.jpg http://i54.photobucket.com/albums/g1...4/DSCF0216.jpg http://i54.photobucket.com/albums/g1...8_edited-1.jpg Started on engine cage and front suspension install http://i54.photobucket.com/albums/g1...4/DSCF0530.jpg http://i54.photobucket.com/albums/g1...4/DSCF0528.jpg http://i54.photobucket.com/albums/g1...4/DSCF0213.jpg http://i54.photobucket.com/albums/g1...7_edited-1.jpg http://i54.photobucket.com/albums/g1..._34/0072-1.jpg Bottom coil was to long had to get shorter length http://i54.photobucket.com/albums/g1...4/DSCF0589.jpg http://i54.photobucket.com/albums/g1...1_edited-1.jpg Front will be getting custom uniball spindles and full floating 2.25 hubs by the end of build Built the wishbone for the 3 link http://i54.photobucket.com/albums/g1...4/DSCF0659.jpg http://i54.photobucket.com/albums/g1...4/DSCF0658.jpg Mounted fuel cell and got it into a roller, this is how it look when I took it from shop in CA (Jan 2010) to my shop in AZ (April 2010) http://i54.photobucket.com/albums/g1..._34/0012-1.jpg http://i54.photobucket.com/albums/g1..._34/0022-1.jpg http://i54.photobucket.com/albums/g1..._34/0042-1.jpg http://i54.photobucket.com/albums/g1..._34/0052-1.jpg http://i54.photobucket.com/albums/g1..._34/0062-1.jpg Roller, with new correct bottom coils http://i54.photobucket.com/albums/g1...4/DSCF0680.jpg http://i54.photobucket.com/albums/g1...4/DSCF0681.jpg http://i54.photobucket.com/albums/g1...4/DSCF0689.jpg http://i54.photobucket.com/albums/g1...4/DSCF0678.jpg http://i54.photobucket.com/albums/g1...4/DSCF0684.jpg http://i54.photobucket.com/albums/g1...4/DSCF0686.jpg http://i54.photobucket.com/albums/g1..._34/0132-1.jpg http://i54.photobucket.com/albums/g1..._34/0112-1.jpg |
Re: FAST Fabrication 94 b4000 turn into SNORE class 7 race truck
lots more work done since then we have mounted the glass, built rear bumper, a new spare set up, seat mounts, battery box, put new housing in, mounted light box, did rear bump cans and more
|
Re: FAST Fabrication 94 b4000 turn into SNORE class 7 race truck
sick. i wish i had a ton of money, id have a crazy prerunner built
|
Re: FAST Fabrication 94 b4000 turn into SNORE class 7 race truck
yea its drained every penny of mine, and im disabled on SSDI good thing for sponsorships and doing own fab work
|
All times are GMT -7. The time now is 08:30 PM. |