Getting to the oil filter on 3.0
I recently bought a 2006 with a 3.0.I was looking at the location of the oil filter.When changing the filter,what is the best way to get at it,from the top,bottom or thru the wheel well.Any HELP would be greatly appreciated to see what method you guys use in changing it.
Thanks, Ed |
If you have the wrapping tool to grab the filter I go from the top to loosen it, then from the bottom to get it off
|
Re: Getting to the oil filter on 3.0
Not sure on the 06, but my 2000 can Easily be changed from the top, I have to stand on a milk carton, and wait till the manifold cools off though.
|
I let the engine cool and get it from underneath. I always only get the new filter hand-tight and it comes off easily by hand.
|
Re: Getting to the oil filter on 3.0
I go from underneath. I also take the box that the new filter came in, open it up and put it over the starter so oil doesn't spill on the starter.
|
Re: Getting to the oil filter on 3.0
I just normally go from the wheel well..straight access to it.
|
Re: Getting to the oil filter on 3.0
^^^X2 that's how I do it.
---------- AND also kids remember to always check your cam synchro every time you change your oil. :) |
Re: Getting to the oil filter on 3.0
Why do u need to check the cam synchro every oil change?
|
Re: Getting to the oil filter on 3.0
well it was a joke. BUT you know how they are prone to failure.
|
Re: Getting to the oil filter on 3.0
Quote:
But somehow 1 year later the single bolt that secures it came loose and the camsync moved and jumped and ruined the gear teeth. So i put in yet another new motorcraft one. also when i rebuilt the 3.0L for my winter beater i had to put in a new one for it. |
Re: Getting to the oil filter on 3.0
I get to mine reaching down from the drivers side fender. The oil that does drip off and onto the starter I spray off with degreaser and water through the wheel well when I am done.
|
Re: Getting to the oil filter on 3.0
I reach down from the top to get a wrench on it. Once I've got it broken free, I reach in from the wheel well, then put the new one on through the wheel well.
|
When I had a 3.0 I got to the oil filter through the wheel well. Took the wheel off the first time, from there I just turned it all the way and could still access the filter just fine.
|
Quote:
|
Re: Getting to the oil filter on 3.0
I'd love to know how you guys can pull the filter through the wheel well without spilling oil all over the place. I always just pull the filter up from the top between the manifold and the steering shaft.
|
All times are GMT -7. The time now is 08:31 PM. |