If it aint my way of sayin hi!
I am John, I own a 1984 Ford Ranger XLT 4x4 with a v6.
I am 17, and have a very troubled Ranger. Its kinda rusted out, and was hoping to get some advice on how to repair it a little. the frame needs replaced, needs the engine rebuilt, the brake line is rusted through... etc... so its pretty bad, and all that is on top of the fact I was parking it when the brakes failed, and I knocked out a headlight hitting a trailer at around 10mph. the tailpipe fell off and we ran over it last summer, so we had to add a piece of pipe to where it broke to put it back on. (oh, and the CV joints are shot =P). http://i41.tinypic.com/2qk8hi0.jpg |
Re: If it aint my way of sayin hi!
Welcome to FRF
|
Re: If it aint my way of sayin hi!
Welcome to FRF. Id say find another truck maybe wrecked and swap parts either to yours or from yours to it to make a good Lil ranger
|
Re: If it aint my way of sayin hi!
Jack up the radiator cap, remove busted pieces, insert new Ranger under cap, replace cap, enjoy!!! JP Sounds like you have a lot of work ahead of you. Find a good junkyard and cruise the craigslist adds. Welcome to the FRF
|
Re: If it aint my way of sayin hi!
Nice. That picture has a lot of character! Welcome to FRF. Good luck John.
|
Re: If it aint my way of sayin hi!
Thanks guys! and yeah, I figured that, I am actually trying to find either another 80's Ranger, or an 80's F150, just because of the body style, (If I go for an 80's F150, it'll have to have a firm built, like post-war).
Any ideas on what the engine is doing if it sounds like a tin can is running around inside of it, while starting it up? |
Re: If it aint my way of sayin hi!
Quote:
|
Re: If it aint my way of sayin hi!
Quote:
I see a lot of the 80 models around where I live so I imagine parts are still out there. |
Re: If it aint my way of sayin hi!
http://www.fordrangerforum.com/membe...engine-pic.jpg
There's the engine, gotta help dad with the lawn, but I uploaded a lot of new images of the ranger, if you got any suggestions on fixes I can do to keep it runnin, or even help keep it from getting worse, please do! |
Re: If it aint my way of sayin hi!
would make a good project for auto shop. To do it right would cost quite a bit, might be better to look for another truck, and use this on for parts or make it an off road rig.
|
Re: If it aint my way of sayin hi!
welcome to FRF, John!
|
Re: If it aint my way of sayin hi!
Thanks!
Yeah, the Ranger is a dump though... http://www.fordrangerforum.com/membe...ds-rebuilt.jpg http://www.fordrangerforum.com/membe...knows-when.jpg nite! |
Re: If it aint my way of sayin hi!
Welcome to FRF. :)
|
Re: If it aint my way of sayin hi!
thanks!
|
Re: If it aint my way of sayin hi!
The interior does not look that bad at all and the OHC is awesome! Welcome
|
All times are GMT -7. The time now is 02:11 AM. |