FRF Watercooler / BS Thread VIII

[oops24]

I'm here joe, was driving a bit

[GhostRanger]

Originally Posted by oops24

I'm here joe, was driving a bit

Good man that you weren't on FRF and driving

You still make those bullet key chains? Or at least how did you make them?

[oops24]

I used a kinetic bullet puller, basically
A hammer that holds a bullet, poured out the powder, loaded into proper cal gun to pop primer, use primer indent to drill a hole with a drill press then stuck a piece of wire thru the hole all the way thru folded so it wouldn't back out of drilled hole then lightly tapped bullet back in with a hammer and rag to protect bullet and looped the outer piece of metal to put a key ring on

[BoyRanger]

pics of said key chains?

[GhostRanger]

Originally Posted by oops24

I used a kinetic bullet puller, basically
A hammer that holds a bullet, poured out the powder, loaded into proper cal gun to pop primer, use primer indent to drill a hole with a drill press then stuck a piece of wire thru the hole all the way thru folded so it wouldn't back out of drilled hole then lightly tapped bullet back in with a hammer and rag to protect bullet and looped the outer piece of metal to put a key ring on

OK cool, I was thinking of making one out of a .223 round for my key chain

[oops24]

The thing I found out about the .223 is since they are small I they kind of need recrimped or something to hold them in better

----------

Dont have pics ATM but I am sanding bumper

[GhostRanger]

Originally Posted by oops24

The thing I found out about the .223 is since they are small I they kind of need recrimped or something to hold them in better

----------

Dont have pics ATM but I am sanding bumper

Will have to remember that. Thanks

[LoneWolf7]

Originally Posted by oops24

The thing I found out about the .223 is since they are small I they kind of need recrimped or something to hold them in better

----------

Dont have pics ATM but I am sanding bumper

Going to paint them black again?

[oops24]

Originally Posted by LoneWolf7

Going to paint them black again?

Yeah, don't know of you noticed but there were lines from sanding and I needed to make it loo better

[LoneWolf7]

I didn't look at it that carefully last time. Next time I will look and tell you that you need to do it again.

[oops24]

Hell I'm making sure its done right this time, used 150 grit to sand whole thing now going over it with medium grit steel wool to smooth out the trouble areas and making it all even.

----------

I figured I might as well get it where I want it before the guard goes on

[LoneWolf7]

Originally Posted by oops24

Hell I'm making sure its done right this time, used 150 grit to sand whole thing now going over it with medium grit steel wool to smooth out the trouble areas and making it all even.

----------

I figured I might as well get it where I want it before the guard goes on

Guessing UPS passed ya by again? And yeah, it'd be a PITA once its on.

[oops24]

Usually around 5-6 here

[BoyRanger]

Dang it!!! I burned my lunch!@!!@$!@$#%!%!@$

[GhostRanger]

Originally Posted by BoyRanger

Dang it!!! I burned my lunch!@!!@$!@$#%!%!@$

Well what did you go and do that for?