Might have to do that. My 9mm CC handgun is a ruger and I love the quality and the company. Really make good guns. I'll be on the lookout for that ruger .17 when the budget allows.

__________________
HAD -93' xlt supercab, 5-speed, 4wd, k&n filter,cb, fog lights
HAD-2000 Ranger Xlt 3.slow V6 4wd K&N, gibson exhaust, cb, hid's, fog lights, backup lights, interior blue lights, kenwood sub & amp, push bar, t-bar crank, frf stickers, cab lights.
NOW-00' xlt reguglar cab, 5-speed, 2wd, coil springs, "rangeriee" as my girlfriend named it , red interior led lights, and much more planned for the future!

They have it in a .22lr, 22mag and .17HMR.

I can't remember all the variations of it...but, I already have plans to buy one in .22lr, with a compact, threaded barrel. :-)

What's the largest capacity magazine they make for it??

__________________
2003 xl 2.3 Dohc. Step side with stock 4.10 gears. 235/70 r15 mastercraft avenger gts with 3 inch body lift. Uws black tool box. Aftermarket pioneer head unit. Flow master 40 series wit turn down pipe!

The 22lr accepts all 10/22 mags...so, BX-25's, 50's, etc...

The 22mag/17 use the same style rotary mag, but only 9 rounds. They have some aftermarket 25 round mags

It depends on what you are looking for, for a magazine. 44mag had the best prices for my AR10. I was specifically looking at ASC stainless steel magazines though. Aluminum or Magpul might be cheaper else where.

__________________
Sgtsandman's Work in Progress
2011 Ranger XLT, 4X4, 4 door Super Cab. 4.0L, 5 Speed M50D-R1HD, 3.73:1, 8.8" open differential, Jason Pace cap
2019 Ford Ranger STX FX4, Super Crew, 2.3L Ecoboost, 10 speed automatic, 3.73:1 with rear locker, Leer 100XR cap

I think he was specifically asking about the Ruger American Rimfire

Oh that's awesome my savage has 5 rds. I been catching hell trying to find a damn 10 rd mag!

__________________
2003 xl 2.3 Dohc. Step side with stock 4.10 gears. 235/70 r15 mastercraft avenger gts with 3 inch body lift. Uws black tool box. Aftermarket pioneer head unit. Flow master 40 series wit turn down pipe!

Anybody ever have problems with their mossberg shotguns only firing some shots? Mines been kinda shooting some and just not shooting other shots and idk what it is! The firing pin isn't broken. I broke it all down last night and cleaned and oiled everything. Any suggestions on things I should look at?

__________________
2003 xl 2.3 Dohc. Step side with stock 4.10 gears. 235/70 r15 mastercraft avenger gts with 3 inch body lift. Uws black tool box. Aftermarket pioneer head unit. Flow master 40 series wit turn down pipe!

Weak/kinked firing pin spring?

Spring is pretty straight. When I push the back of the firing pin it's pretty hard to push. I gotta find a way to test it but I cleaned it and oiled it last night and actually today the whole assemble seems more free moving so that might have worked maybe. Idk it used to not fire every once in a blue moon but the other day I went duck hunting and I can't tell you how many times it didn't fire and I lost shells in the marsh!

__________________
2003 xl 2.3 Dohc. Step side with stock 4.10 gears. 235/70 r15 mastercraft avenger gts with 3 inch body lift. Uws black tool box. Aftermarket pioneer head unit. Flow master 40 series wit turn down pipe!

Did you collect any and double strike them?

Haha no I didn't but I just found one laying around. I saw people say if you tape over the primer and dry fire it, it should pierce the paper. Would you say that's accurate?

----------

Oh yea I got what you're saying now lol yea the shells were fine the few I got before they landed in the water didn't have primer strike but they then were able to fire later

__________________
2003 xl 2.3 Dohc. Step side with stock 4.10 gears. 235/70 r15 mastercraft avenger gts with 3 inch body lift. Uws black tool box. Aftermarket pioneer head unit. Flow master 40 series wit turn down pipe!

If you're not getting a primer strike, focus on the firing pin and spring.

Pull the pin and look through the channel it slides in

Yea I wasn't but I think it's fixed now. I did the test where you tape the primer of a spent shell. And it pierced the tape every time. And I did the pencil test. But in this case I used a marker being as it's bigger. I guess it was just really dirty because last night was the first time I actually broke it all the way down and cleaned it and there was lots of crud in the action and all that. Now I just gotta actually run some rounds through it

__________________
2003 xl 2.3 Dohc. Step side with stock 4.10 gears. 235/70 r15 mastercraft avenger gts with 3 inch body lift. Uws black tool box. Aftermarket pioneer head unit. Flow master 40 series wit turn down pipe!

I guess people do meth and post ammo for sale hahaha

Attached Images

image-3535010107.jpg (43.3 KB, 20 views)

__________________
2003 xl 2.3 Dohc. Step side with stock 4.10 gears. 235/70 r15 mastercraft avenger gts with 3 inch body lift. Uws black tool box. Aftermarket pioneer head unit. Flow master 40 series wit turn down pipe!