Your Gun Pics, Post Em Up! - Page 85

11Sport · #**1261** 04-24-2013, 01:53 PM

Quote:

Originally Posted by TurdFX4

I tried your test and I can't push it forward like you said. And yes, it does chamber another round.

This may be a dumb question, but there isn't a difference between " 9mm parabellum " and 9mm luger " right?

No difference. All 9x19

TurdFX4 · #**1262** 04-24-2013, 01:53 PM

Well its a 12 year old gun and the guy I bought it off of said he has about 700rds through it

GhostRanger · #**1263** 04-24-2013, 01:54 PM

Quote:

Originally Posted by TurdFX4

I tried your test and I can't push it forward like you said. And yes, it does chamber another round.

This may be a dumb question, but there isn't a difference between " 9mm parabellum " and 9mm luger " right?

OK that takes that problem off the table. No there is not a difference. 9mm Para, 9mm Luger, 9x19mm is all the same ammo.

Quote:

Originally Posted by 11Sport

Well if it chambers another round that means that it can't be that the recoil spring is too sting, or the ammo too weak. Could be that it is too weak in not allowing the slide to be pushed all the way back forward after the shot.

That would still allow the hammer to come down, the hammer is not locking back after the first shot. Correct Turd?

FX4level2 baja · #**1264** 04-24-2013, 01:56 PM

Sounds like its time for a 1911 compact

GhostRanger · #**1265** 04-24-2013, 01:56 PM

Quote:

Originally Posted by TurdFX4

Well its a 12 year old gun and the guy I bought it off of said he has about 700rds through it

700 rounds shouldn't even phase that gun. Have you stripped it down and cleaned it? I am sure that you have but just trying to eliminate possible causes.

11Sport · #**1266** 04-24-2013, 01:57 PM

Is it well lubed? Take the slide off and visually inspect the rails on the receiver and the slide, look and feel for burrs or anything that might disrupt the slide from seating properly on the receiver.

TurdFX4 · #**1267** 04-24-2013, 02:00 PM

Quote:

Originally Posted by GhostRanger

OK that takes that problem off the table. No there is not a difference. 9mm Para, 9mm Luger, 9x19mm is all the same ammo.

That would still allow the hammer to come down, the hammer is not locking back after the first shot. Correct Turd?

Correct

Quote:

Originally Posted by FX4level2 baja

Sounds like its time for a 1911 compact

This my girlfriends gun... I don't believe she'd want a .45

Quote:

Originally Posted by GhostRanger

700 rounds shouldn't even phase that gun. Have you stripped it down and cleaned it? I am sure that you have but just trying to eliminate possible causes.

It was stripped and cleaned, yes.

Quote:

Originally Posted by 11Sport

Is it well lubed? Take the slide off and visually inspect the rails on the receiver and the slide, look and feel for burrs or anything that might disrupt the slide from seating properly on the receiver.

It appears to be well lubed

GhostRanger · #**1268** 04-24-2013, 02:04 PM

OK, let me do some thinking and looking on this. To bad we aren't in the same city I and could take a look at it in person.

11Sport · #**1269** 04-24-2013, 02:06 PM

Ok. One way to find out. Take the gun place it off safe, pull the trigger and hold while racking back the slide and immediately releasing, make sure you pull it back all the way before releasing it. And then slowly let go of the trigger, you should hear an audible pop. If you dot hear the pop let me know.

FX4level2 baja · #**1270** 04-24-2013, 02:06 PM

Quote:

Originally Posted by TurdFX4

This my girlfriends gun... I don't believe she'd want a .45

You can get them in .22, .38, 9mm, 10mm and .45

GhostRanger · #**1271** 04-24-2013, 02:10 PM

Quote:

Originally Posted by 11Sport

Ok. One way to find out. Take the gun place it off safe, pull the trigger and hold while racking back the slide and immediately releasing, make sure you pull it back all the way before releasing it. And then slowly let go of the trigger, you should hear an audible pop. If you dot hear the pop let me know.

Good thinking, Not sure why I was focused on the slide and hammer. If the trigger doesn't reset then the spring may be bad.

TurdFX4 · #**1272** 04-24-2013, 02:11 PM

Quote:

Originally Posted by FX4level2 baja

You can get them in .22, .38, 9mm

Thats like buying a 6 cylinder mustang

----------

Quote:

Originally Posted by 11Sport

Ok. One way to find out. Take the gun place it off safe, pull the trigger and hold while racking back the slide and immediately releasing, make sure you pull it back all the way before releasing it. And then slowly let go of the trigger, you should hear an audible pop. If you dot hear the pop let me know.

I'll try that

11Sport · #**1273** 04-24-2013, 02:16 PM

Quote:

Originally Posted by GhostRanger

Good thinking, Not sure why I was focused on the slide and hammer. If the trigger doesn't reset then the spring may be bad.

I imagine the recoil spring is too strong/ ammo being too weak. May have gotten a bad batch from the store

GhostRanger · #**1274** 04-24-2013, 02:18 PM

Quote:

Originally Posted by 11Sport

I imagine the recoil spring is too strong/ ammo being too weak. May have gotten a bad batch from the store

I meant the trigger reset spring.

FX4level2 baja · #**1275** 04-24-2013, 02:18 PM

Quote:

Originally Posted by TurdFX4

Thats like buying a 6 cylinder mustang

You can swap barrels and clips