I have a project coming up in the near future that I am going to want to wire some strip LED lights into a wall socket, I'm looking for suggestions for lights, and also some sites where I can get info on it..

superbrightleds.com is a good site.

__________________

of course, you already know that LEDs are current-based devices operating in low-voltage DC circuits, and "wall sockets" are high-current AC voltage sources, right?

__________________
2001 Ranger XLT 4.0L SOHC
Silver Frost w/ Dark Graphite interior


Modifications
Summit 3" Body Lift
31x10.50 A/T tires
Explorer overhead console
Explorer auto-dim mirror
Explorer auto-headlights
Aux1 & Aux2 inputs on factory AM/FM/CD/Cassette
Door-dinger silencer button
Seamless retractable roof and passenger-side ejection seat with steering wheel mounted controls and safety interlock

yes, this I know....I guess my main question is can this be modified to work?

And for those wondering, the project is going to be a beer pong table.

modified, no.

but, you can use a transformer to step the voltage down to a manageable level, then a bridge rectifier to convert it to DC, then a bank of current-limiting resistors to keep the LEDs from burning out (unless they're already built into the "LED strip" you have).

__________________
2001 Ranger XLT 4.0L SOHC
Silver Frost w/ Dark Graphite interior


Modifications
Summit 3" Body Lift
31x10.50 A/T tires
Explorer overhead console
Explorer auto-dim mirror
Explorer auto-headlights
Aux1 & Aux2 inputs on factory AM/FM/CD/Cassette
Door-dinger silencer button
Seamless retractable roof and passenger-side ejection seat with steering wheel mounted controls and safety interlock

ok, this is why I posted before I bought anything. I guess I have a lot of research to do