Hey y'all I warped a head in my '95 XLT so she's a parts truck now. Let me know what your after parts wise and I'll give you a price+shipping. I have the whole truck so i have everything trim, suspension, etc. The truck is going to the junkyard in the spring so get it while its hot. I'll take most things out but obviously I'm not removing pistons and such.

__________________
1994 Ranger XLT 4x4, dana 60 front end, f150 rear end, 4" lift, 31X10.5
1992 Dodge 2500 Cummins, Stock

What about the wire from the radio to the antennae that goes through the dash?

----------

Where are you from also?

__________________
1998 ranger with 4.0 v6 and I use it to plow! My plow is a hydraulic Meyers 6.5

Pics?

__________________
Gold 05 xlt 4.0 auto 4x4.

My build thread
http://www.fordrangerforum.com/proje...build-log.html

Is the center console broke?

__________________

-Link-

That's what I need. If he doesn't take it I will.

__________________
2000 Ranger Extd Cab XLT, 4X4 Off Road, 4.0L, Auto, 8.8 - 4.10's, 01 grille & lights swap.
69 Mustang, modified 5.0, & 5spd.(project)
99 Explorer Sport, 4.0 SOHC, Auto, 8.8 - 4.10's, PW, PL, PM, Cruise, Tilt. (Wife's DD)
05 F-150 2WD Regular Cab. ( My DD)

what kind of lift is on it. if its a body lift, i would be interested.

Where are you located
what kind of rear bumper does the truck have

__________________
95 Ranger XLT 4x2 2.3 I4 5 speed 206,000 *dead*
96 Ranger XLT 4x4 4.0 V6 5 speed 173,000 *alive*
D35 front, 8.8 rear, 3.73 gears, limited slip rear diff

I have the antennae and I'm in Red Deer AB

----------

I'm in Red Deer AB and the front and rear bumpers are pretty dented and rusty. Not really sellable

----------

Yes the plastic clip was repaired previous. It does close but has about a 1/2 inch gap between the lid and base

__________________
1994 Ranger XLT 4x4, dana 60 front end, f150 rear end, 4" lift, 31X10.5
1992 Dodge 2500 Cummins, Stock

with the wire attached?

__________________
1998 ranger with 4.0 v6 and I use it to plow! My plow is a hydraulic Meyers 6.5

[/quote=Eman125;1930011]with the wire attached?[/quote]

yes the wire is attached

__________________
1994 Ranger XLT 4x4, dana 60 front end, f150 rear end, 4" lift, 31X10.5
1992 Dodge 2500 Cummins, Stock

Would you sell the GEM Module? (located in the center of the dash behind the radio). I'm in Ontario and can't seem to locate one.
Thanks,
John

__________________
1995 Ford Ranger XLT 4.0 4X4 M/T
Big tires and Big rust

Do you have the black door sill plates? Not the ones that says ranger, but the ones that is screwed into the floorboard along the door where the carpet starts?

__________________
ALL JACKED UP..... 4.0 V6 manual 5 speed, K&N cold air filter system, Helix high tower throttle body spacer, 33/12.50r15 BF Goodwrench A/T, 456 gears, 4" suspension lift, 3" body lift, james duff arms, fox racing shocks, superlift springs, dual exhaust, flowmaster super 10, Pioneer DEH-X9600BHS, Polk Audio MM series speakers and 10" subs, Polk Audio Amps, Rockford fosgate wiring and capacitor, Streetglow lights.. http://www.jamesduff.com/
http://streetglow.com
http://facebook.com/clinton64xl

Is your truck a 3.0? If so, im interested in the a/c compressor and alternator wiring.

Also, im interested in the blend door actuator with all its plugs and wiring.

Let me know pal! Thanks a lot

__________________
Paysandú, Uruguay
1996 Reg. Cab Ford Ranger, V6 3.0L, 5 speed manual trans.

THAT AWESOME MOMENT WHEN YOU REALIZE YOU CAN TAKE ALL THE PEOPLE THAT BOUGHT A JUSTIN BIEBER ALBUM, MULTIPLY IT BY 6 AND STILL DON`T GET TO REACH THE SELLINGS OF PINK FLOYD`S "DARK SIDE OF THE MOON"

If it's a manual trans I'll pay $10 for the clutch reservoir cap.

I could sell that as long as I can get it out, what does it look like?

----------

I'm not sure what your referring to. Can you post a pic of it?

----------

My truck is the 4.0 man

----------

Sold PM me your shipping info

__________________
1994 Ranger XLT 4x4, dana 60 front end, f150 rear end, 4" lift, 31X10.5
1992 Dodge 2500 Cummins, Stock