Tom

I've never done this before so I'm not sure how it works. I have a 2000 Ranger with a 3.0. CEL is on codes P0171, 174. Scanner seems to show normal voltage readings for most sensors. The only weird reading is STFT B1-S2 99.2%. I have sprayed brake cleaner and starting fluid all over the engine and can't find any vacuum leaks. Any thoughts?

Want to know 2001 2wd 3.0 stock will be able to handle 31x10.5 with wrangler 15 inch rims. Mahalo. Thanks in hawaiian

Hey man don't want to be a weight but was wondering if you could change my username to 'gator' if it is not taken. Thanks for your time.

I'm a new member here so have no idea how to follow my text question. Just check in every couple of hours?

I need to remove/replace my fuel filter on my 2005 Ranger - any helpful hints7

will the transmission out of a single cab ranger fit into an extended cab ranger with no modifications if the motors are the same and the year models are the same

Hi Tom, My name is Brett and I'm new here. I'm getting ready to change the timing chain on my 91 Ranger with a 3.0 in it. I believe from the way the engine sounds when it is turning over that its ether the chain or a blown head gasket not sure which so im starting with the chain. Any suggestions?

Hi, i just joined the foum and really need some assistance. I have a 1993 ranger 4.0 V6 XLT there is a fuel line leak possibly from the lines running from cannister to tank. also the air/fuel mixture is way off. sensors maybe ? help me diagnose this beast of a truck. i already changed plugs,wires,oil,filters air and fuel. help

New to forum from Darlington, S.C. have a 2001 Ranger Edge with 4.0 auto. Bought new. 86 thousand miles.

I'm brand new here so please bear with me if need be .
I have a 2001 Ranger Edge 3.0 5 speed 2 wheel drive .
I was thinking of maybe changing the gearing in the rearend for better fuel mileage . Good idea / bad idea ?
Any thoughts , comments , greatly appreciated !!