mcd58

i didn't, only reason was is because i don't need a lift lol i love having decent mpg's

np, got any wd-40 or pb blaster? soak the bolts down prior to trying to removing them. The longer the better

If you wanted to make the job 100 times easier, you can remove the bed, this alone will take 30 minutes if you have a few people around. if not just basically jack the ass end up by the hitch (if you have one) and chock the two front tires. basically what you want to do is fully relax the suspension. from there on its just unbolt and go

yeah! personally i would have spent the extra money for the 9000's but instead i got the 5000's i say go for them!

thanks!

its easy to check, just pull the knob off and with a screwdriver push in on the insert, it should pop out the back.

its a secret... lol no ill tell you. if you take out the knobs, an pop out the little color pin inside, it should be colored. im not sure what youll have though. some are solid green (all of the plastic is green) and some are all clear plastic with green dye on the end. mine were clear with the green dye. sand down the end, making the dye go away, then color both ends with whatever color shaarpie you want. some colors work better than otheres. red, if layered (layer the colors, have on coat on both ends, creating two layers) works fairly well. if you dont have layers, it comes out pinkinsh. if you dont have clear knob inserts you can probably pocket some at a junkyard.

great subs. will last you a very long time and there pretty loud for 10s

the 2 10s?

oh shit lol deleting now!