jsmooth

Sorry I don't get on here much. You asked about my fog lights on my 2011 XL.

I bought the fog light mounts on ebay cheap.
A wire to bulb connector x2 on ebay
A wiring harness through Buggman
and just generic automoble wiring and heat shrink tubing wherever is cheap local

It probably cost me about a 100 bucks to do, probably 5ish hours to install because I didn't really know what I was doing. Plus I wanted it wired separate on my dash as you can see in my pics

To get the corner lights black I removed them from the truck, its pretty easy to do you just take the headlights out then its like 2 screws for the corners. then you get 600 and 1500 grit sandpaper use the 600 first, wash it off then use the 1500 wash it off then i used a headlight/tail light tint that comes in an aerosol can and put on a couple coats, sanded it down again with the same method as before and then put a clear coat over it.