OK here goes. I am sure this is not the first time this has been asked so I apologize up front for being such a noob on it. I installed a 2/3 drop kit in my '01 4cyl ranger and my front wheels camber in bad. The adjustment is all the way and does not fix the problem. I am sure there is an easy fix for the problem and feel confident in this forum that I will get my answer. Are there offset bushings available or something like that and do they go into the lower arms, I also saw in another thread about a part that goes on the upper ball joint, what is that?

It's very possible that your adjusters aren't that adjustable. I have +/- 3 degree. Got a pic of them?

__________________
-Alex
'10 Ranger XL 2.3L Manual
Mods: Stereo, Tint, Weatherguard rain shields, Intake silencer removal, LED brake, turn signal, reverse, license plate, and dome lights, DDM HID's (currently removed), lowered, 17" wheels with spacers, Explorer autodim mirror with Autolamps, Magnaflow exhaust, Buggman LED 3rd Brake Light...

google camber eccentric bolts

napa sells the most degree adjustable camber bolts i could find..you need them for any drop!

__________________
2000 Ranger XLT(my highway saver)
2.5l 5spd,coilpack mod,3.73 rear,DJM 4/5,Roush swaybars,straight pipe,HFAI,undercover tonneau cover,pedal mod,cleared out front,LEDs throughout,10,000k HIDs,Mustang dome/map
30mpg highway

http://shop.illusivefabrications.com...alignment-kit/ These and then take the truck to an alignment shop.

__________________
91 explorer
00 ranger