Question for gen3 DJm 3-4 kit owners

Sonic04edge · #1 12-09-2011, 04:08 PM

I've dont the djm kit on on the 98. My question is on the 3-4 kit are you supposed to run the stock springs?

Bwad · #2 12-09-2011, 07:43 PM

Yes.

Sonic04edge · #3 12-10-2011, 01:27 PM

Thanks Brad

Bwad · #4 12-10-2011, 07:04 PM

No problem Mike.

Sonic04edge · #5 12-11-2011, 12:41 AM

Gonna be getting my gen3 back from josh and it's going to get the 3-4 treatment. Along with 17x9 up front and 17x10.5 rear.

Btw are you running a spacer up front? I had to on the 98.

Bwad · #6 12-16-2011, 06:56 PM

Yeah, I'm running 1.25" up front but probably could have pulled off a 1". 98's have different sized hubs but I'm 99% sure you'll have to run at least a 1" on front in order to clear the hubs.

Sonic04edge · #7 12-16-2011, 10:45 PM

That's what I figured. Thanks Brad.

Bwad · #8 12-17-2011, 10:58 PM

Yee!

Actually, rstangboi had a 98 he lowered with the same rims as mine. He ran a 1" spacer and it worked fine.

Our rims are 17x8 though. Not sure how big of a difference that will make.

Sonic04edge · #9 12-18-2011, 10:02 AM

Quote:

Originally Posted by Bwad

Yee!

Actually, rstangboi had a 98 he lowered with the same rims as mine. He ran a 1" spacer and it worked fine.

Our rims are 17x8 though. Not sure how big of a difference that will make.

On my 98 I ran a 1" spacer on a 9" wheel and it was about flush with the fender and looked great and matches perfectly with a 10.5 wheel on the rear.