Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #1  
Old 07-25-2011, 04:26 PM
letsfightrob letsfightrob is offline
Learning to use the forums
 
Join Date: Jul 2011
Posts: 1
Default From Lifted to Lowered

So I have a 94 2.3l 2wd xlt and it has a 5inch superlift on it. I didnt install the lift myself, I had a shop do it. i want to lower it the 2/3 with drop springs and a flip kit. But I need to know what stock parts except for shocks I will have to replace when taking the lift off. Anybody have any experience?
My main concerns are the sway bar bracks and pivot arms. Im not sure where to get the stock brackets, if there are even brackets or if they just bolt back up to where the brackets go, without the brackets.
Reply With Quote
  #2  
Old 08-03-2011, 09:29 AM
Z3CHYD Z3CHYD is offline
Learning to use the forums
 
Join Date: Apr 2009
Posts: 12
Default Re: From Lifted to Lowered

2/3 you shouldnt need anything other than an alignment and camber bushings for the correct camber, if you go any lower than that in the future than you maybe want to look into drop shocks
__________________
97 Ford Ranger- 2.3L 5-speed, 2wd Lowered 5 inches
86 Ford Ranger- 2.9L 5-speed, 4x4
84 Ford Ranger- 302 5-speed, True Duals, Beast!!
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
Lifted, Lowered, or Stock? GGlighting General Ford Ranger Discussion 31 05-08-2011 07:53 PM
97" Lowered Bighomedog11 Lowered Suspension 14 04-15-2011 07:33 AM
Are you lifted lowered or stock? 2004xlmiller Suspension Tech 35 10-31-2010 09:22 AM
Has it been lowered? ridder1705 Suspension Tech 1 10-21-2010 05:09 PM
Lowered it again... dross93ranger Vehicle Snapshots 1 03-14-2010 08:58 PM