I'm wondering if my truck will sit remotely level with 2'' lowering coils and 4'' lowering leaf springs. I'd like to keep the hangers stock in case I sell the truck someday I can return everything to factory. The truck is a 2wd 1994 single cab 4 banger.

This is my truck with the original 3/5 drop. Little further on both sides but it'll be around the same difference in drop.
I think I ended up being a hair lower up front with that drop, but I also didn't mess with hangars so it might've been more like 4.5" rear drop. 5" is just what the kit said, I never actually measured.

2002 2.3 Mini Ranger

----------

Another angle

2002 2.3 Mini Ranger

I think it would be really close

[Mention]superdog299[/mention] nice truck!

What size tire are you running in that picture?

__________________
2008 XL 2.3l 5speed 2inch rear drop shackles. 15x8 rims on 235/75r15

Those are stock size, something around 225/75r15

2002 2.3 Mini Ranger

----------

Here's my truck with the same drop on 245/45r18 tires


2002 2.3 Mini Ranger

Any rubbing at all?

__________________
2008 XL 2.3l 5speed 2inch rear drop shackles. 15x8 rims on 235/75r15

I have slight rubbing on my Ranger in the front. 235/50r18 on a 18x8.5 +20. Only rubs at full lock on the plastic cover over the spring. Stock height (for now)


Sent from my iPhone using Tapatalk

__________________
2001 Ranger XLT 2wd | 18" TSW Sonomas

I rub just a hair on full lock on the fender liners up front, and the rear hits a little nub on the very outer edge of the fender liner on the rear when I go over bumps

2002 2.3 Mini Ranger