Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #1  
Old 03-16-2017, 05:38 PM
brennancody0 brennancody0 is offline
Learning to use the forums
 
Join Date: Mar 2017
Posts: 4
Default First time truck owner, looking to go low for cheap.

I have a 2000 Ford ranger rwd 3.0 v6 5 speed manual, looking to lower it with the 5" flip kit in rear, and cut my springs up front... Also wondering if the current 235/75r15 tires will be an issue. Thanks every one.


Sent from my SAMSUNG-SM-G900A using Tapatalk
Reply With Quote
  #2  
Old 03-16-2017, 05:55 PM
Undrstm8ed Undrstm8ed is offline
Habenae Est Dominatus
 
Join Date: Apr 2013
Posts: 1,247
Default Re: First time truck owner, looking to go low for cheap.

Cheap? Easy.. let the air out of the tires. It be safer than your cut spring theory.

Dont cut the springs, to do so not only reduces the payload capacity of the vehicle in general to keep it safe while moving down the street and not putting someone else and their family at risk for your "cool factor", buy an appropriate set of lowering springs that maintain or improve ride comfort, control of the vehicle in YOUR favor, and maintain capacity of the vehicles weight as it corners, moves through uneven pavement etc.. that FIT your needs or demands aesthetically.

As for your tires, just like tires lift a vehicle they can later ride height. Id use this to find your vehicle, and put your current tire configuration into it and then see what a 225/50/15 does and play with it.

My suggestion would be to find the right wheel offset/size & tire combo that works for you and then lower the vehicle based upon those parameters.

http://www.rimsntires.com/specspro.jsp
__________________
"Your right, there is no "I" in Team But there sure is in Independence, Individuality, and Integrity.."

- 93' Ranger, Overland Build thread http://www.fordrangerforum.com/proje...ing-build.html
Reply With Quote
  #3  
Old 03-16-2017, 06:45 PM
whiskeymike whiskeymike is offline
Ford Tough
 
Join Date: May 2016
Posts: 431
Default Re: First time truck owner, looking to go low for cheap.

For springs they are pretty cheap but a bunch of people out there running cut coils on rangers. Some vehicles they don't seat properly, making them unsafe.

You're not going to get very low at all & maintain a good ride for cheap.

Those tires are pretty big for over 2 " up front.

----------

I would read every post and look at all the pictures in this thread (link below) before you dig into it or order parts.

Official Static Drop Thread
__________________
97 xlt stepside
2.3 m5od
210,000
6/6 drop
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
first time truck owner ,first time ford owner 2004level2 Introduce Yourself 8 01-16-2016 03:33 PM
First time truck owner! ckirsebom Vehicle Snapshots 25 06-05-2013 09:49 PM
First time truck owner Runvsofthisbull Introduce Yourself 2 05-09-2013 08:48 PM
1st time truck owner!!! B00Ze Introduce Yourself 10 01-02-2013 02:28 PM
First Time Truck Owner FlySwatter Introduce Yourself 5 10-30-2010 01:05 PM