I did the rear shackle flip and cut 1 coil off the front.i want to get the rear flip now but want to know how much of a drop I can do in the front with out getting drop beams

What year truck?

Its a 94 mazda b3000 extended cab.I ended up cutting a total of 1 and a half coils for about 2" drop.I also did the rear flip but along with the rear shackle flip I was about 2" from hitting the frame so I put the rear shackles back the stock way.I measured on a flat surface and I need to go down another inch in the front to be level.my camber isnt all that bad off now so im guessing with another inch drop in the front an alignment shop should be able to get the right bushings in there

Ya, one coil is about the most I would cut off. I cut mine and it rides like shit so I'm getting drop springs in a few months. I'd say spend the money if you want to go that low. I have about a 2/3 drop and that's all I want