|
09-14-2014, 06:15 PM
|
|
Possible 331 build?
|
|
Join Date: Oct 2012
Posts: 2,074
|
|
Yeah pictures will help
__________________
1996 Ranger XLT | 2.3L 5 speed | 7/9 dropped |
2015 F150 XLT | 2.7 EcoBoost 6R80 | 4/6 dropped | wife’s truck!
|
Register and never see these ads again. |
|
09-14-2014, 06:20 PM
|
|
slut life
|
|
Join Date: Oct 2010
Posts: 3,031
|
|
Re: Official Static Drop Thread
No don't have a pic :/ so the u shaped metal bracket that the axle sits in with the off set hole for the spring center pin. The axle sits up higher in the bracket so that the bracket doesn't touch the under side of the factory spring perches. So you could rock the pinion up and down. It's like the bracket sides need to be longer or my factory spring perches are sitting up higher than normal...
----------
Here is my pile of parts. My dd 98
4/5 with front cut springs for almost 5 inches up front.
Stock 15 inch xl wheels and tires until I get wheel spacers for my black 5 spoke cobra replicas.
Here it is with my other pile of parts that is on 33s with maxed t bars and 3 inch body lift.
__________________
99 extended cab, 4.0, auto, 33s, 4x4 lifted with some stuff done
98 2wd 2.5, 5 speed, dropped with some stuff done
|
09-14-2014, 06:23 PM
|
|
and AnythingWillHappen
|
|
Join Date: Oct 2012
Posts: 3,538
|
|
Re: Official Static Drop Thread
Quote:
Originally Posted by ben10
No don't have a pic :/ so the u shaped metal bracket that the axle sits in with the off set hole for the spring center pin. The axle sits up higher in the bracket so that the bracket doesn't touch the under side of the factory spring perches. So you could rock the pinion up and down. It's like the bracket sides need to be longer or my factory spring perches are sitting up higher than normal...
|
Did the U piece center hole fit through the spring center pin? On Ian's we had to bore out the center hole on the U piece. Pictures will help out A LOT!!
__________________
2010 Fx4 F150
2003 Ford SVT Cobra
2000 Ford Ranger XLT 4x4 Offroad =====SOLD
5.0 V8 with L/S 4.10's and a lot of other crap
|
09-14-2014, 06:24 PM
|
|
slut life
|
|
Join Date: Oct 2010
Posts: 3,031
|
|
Re: Official Static Drop Thread
Yeah the pin is in the hole and the bracket is sitting flat on the springs. Maybe the center pin is sticking up too high and the axle is sitting on them instead of in the bottom of the bracket. I just thought of that. I'll get some pics tomorrow.
__________________
99 extended cab, 4.0, auto, 33s, 4x4 lifted with some stuff done
98 2wd 2.5, 5 speed, dropped with some stuff done
|
09-15-2014, 10:33 PM
|
|
Four Bangin' Ridin Low
|
|
Join Date: May 2013
Posts: 1,179
|
|
__________________
Evil little Street Truck
Quote:
Originally Posted by black 06 ranger
That's a true low ranger!
|
Quote:
Originally Posted by Stewart
YES. That looks so good. You and darkside are murdering the lowered game (in more ways than one haha).
|
|
09-16-2014, 12:40 AM
|
|
photog
|
|
Join Date: Jun 2012
Posts: 3,739
|
|
dat wheels
y u no match
__________________
1997 Ford Ranger XLT
2.3L I4, 5 speed manual | Build
Flipped Shackles | Cat Delete | Polished Stock Exhaust | Throttle Cable Mod | LED conversions [cluster, HVAC, tag]
JVC KD-HDR60 | Polk Audio db6501 | Bazooka Bass Tube BT6024DVC | Hifonics ZRX1000.4 | PAC-LC1
RIP 10/8/15
|
09-16-2014, 12:51 AM
|
|
Four Bangin' Ridin Low
|
|
Join Date: May 2013
Posts: 1,179
|
|
Wheels my uncle gave me didn't fit the front so I'm waiting to get a different size.
__________________
Evil little Street Truck
Quote:
Originally Posted by black 06 ranger
That's a true low ranger!
|
Quote:
Originally Posted by Stewart
YES. That looks so good. You and darkside are murdering the lowered game (in more ways than one haha).
|
|
09-21-2014, 07:01 AM
|
Ford Truck Driver
|
|
Join Date: Aug 2013
Posts: 87
|
|
Re: Official Static Drop Thread
Seeing these pictures brings back memories. My first truck was a 1996 ranger single cab, step side with a 2.3l and auto trans.
Mods were:
3/5 drop
Djm dream beams front and Djm flip kit rear
Leer color matched hard cover
17 billet eagle alloy wheels
Billet grill upper and lower
Euro clear headlights and corners
Euro tail lights
4x4 lower valance with fog lights
Flowmaster exhaust
Kicker sound system
I know i am missing a few things but I sold it 9 years ago. I would pay anything to get it back.
__________________
2002 Ford Ranger Ex Cab FX4 Twin Stick
32/11.5r15 BFG KO on OEM Alcoas
Last edited by Justanotherhemi; 09-21-2014 at 07:02 AM.
Reason: Word
|
09-22-2014, 07:39 PM
|
|
slut life
|
|
Join Date: Oct 2010
Posts: 3,031
|
|
Re: Official Static Drop Thread
__________________
99 extended cab, 4.0, auto, 33s, 4x4 lifted with some stuff done
98 2wd 2.5, 5 speed, dropped with some stuff done
|
09-22-2014, 08:23 PM
|
|
photog
|
|
Join Date: Jun 2012
Posts: 3,739
|
|
That's clean!
Except the tires. Gimme a scrub brush, some APC, and some dressing.
__________________
1997 Ford Ranger XLT
2.3L I4, 5 speed manual | Build
Flipped Shackles | Cat Delete | Polished Stock Exhaust | Throttle Cable Mod | LED conversions [cluster, HVAC, tag]
JVC KD-HDR60 | Polk Audio db6501 | Bazooka Bass Tube BT6024DVC | Hifonics ZRX1000.4 | PAC-LC1
RIP 10/8/15
|
09-22-2014, 08:33 PM
|
|
slut life
|
|
Join Date: Oct 2010
Posts: 3,031
|
|
Re: Official Static Drop Thread
Yeah tires got soapy scum on them from the alignment shop. It's taken them 3 times so far. It's almost aligned right... I cut the mud flaps about 2 inches shorter after this pic. They scraped constantly with my dirt bike in the bed.
__________________
99 extended cab, 4.0, auto, 33s, 4x4 lifted with some stuff done
98 2wd 2.5, 5 speed, dropped with some stuff done
|
10-05-2014, 11:17 AM
|
|
Ford Tough
|
|
Join Date: May 2013
Posts: 322
|
|
So here's a better pic of my baby,
Mods to come-
Fix the black below the body line.
New djm arms
C-notch the frame so I get more suspension travel.
Paint the bumpers and grille
All I can think of for now.
|
10-05-2014, 09:47 PM
|
|
Possible 331 build?
|
|
Join Date: Oct 2012
Posts: 2,074
|
|
Quote:
Originally Posted by jaacobmcc
So here's a better pic of my baby,
Mods to come-
Fix the black below the body line.
New djm arms
C-notch the frame so I get more suspension travel.
Paint the bumpers and grille
All I can think of for now.
|
Were you at MJR in Southgate earlier tonight? Because I saw a truck similar to yours and parked on the other side of the car next to it.
__________________
1996 Ranger XLT | 2.3L 5 speed | 7/9 dropped |
2015 F150 XLT | 2.7 EcoBoost 6R80 | 4/6 dropped | wife’s truck!
|
10-05-2014, 11:24 PM
|
|
Habenae Est Dominatus
|
|
Join Date: Apr 2013
Posts: 1,893
|
|
Re: Official Static Drop Thread
Quote:
Originally Posted by jaacobmcc
haha I'm downriver.
|
Quote:
Originally Posted by IDM
No shit. I'm in Riverview
|
Quote:
Originally Posted by IDM
Because I live just south of Detroit haha
|
Its so odd being from SoCal and seeing so much product and industry coming from there as a Previous performance/custom shop owner in Michigan and growing up in Michigan.
NOW since moved back to SoCal in 09' and seeing so many people from Michigan on a forum, especially from my own backyard is equally odd because I know the entire Downriver community like the back of my hand, well minus whats changed in the last 5 years.. lol
Grew up in Southgate and Trenton, had a huge shop in Troy of 13.5 mile and Dequinder.
|
10-06-2014, 03:43 AM
|
|
Ford Tough
|
|
Join Date: May 2013
Posts: 322
|
|
Quote:
Originally Posted by IDM
Were you at MJR in Southgate earlier tonight? Because I saw a truck similar to yours and parked on the other side of the car next to it.
|
that was me sir. My girlfriend wanted to see good girl. Sounds lame as hell but wow was that movie a mind fuck haha. I didn't get to see your truck tho.
|
|
|