|
|
|
|
03-23-2010, 12:13 PM
|
|
Ford Rangers
|
|
Join Date: Jan 2010
Posts: 208
|
|
Body mounts for lift # and Tire Size?
Got 2 quick questions for ya. I've ordered Belltech 6400 shackles. And I am ordering Performance Accessories BB01 Body mounts (1" high x 3" round BL). Going to do the 1"BL + Shackles + Torsion Bar Crank for a total lift of 2". And replace my 31" Tires with 32" or 33" Tires. Don't want to go to crazy yet (to new) and it's my daily driver. But it's just to low for my liking right now. No need for Shifter, Steering, Ground strap etc.... extensions either. And cheap way to get a bit of lift ($70CND for 2 Shackles and $34CND for 12 1"BL's = $104CND + tax for 2" lift). Not bad at all ah? Will eventually be doing the Hurst Shifter (cure the console shifter clearance with the 1" BL issue). I'll sort out the 1" bumper gaps easy enough (might just do front bumper and leave the rear so the hitch dosn't look funky, put a plate across the gap).
Question #1 - How many body mounts are there on my 2010 FX4 Ranger (extended cab / short box)? 12 or 14? (or is it 14 or 16?) I think it's 12. And 14 for long box. Correct me if I'm wrong, just wanted to make sure before ordering.
Question #2 - Which tire size do you think I should go with 32" or 33"? (Just cant make up my mind)
Any Pics (this set up) any help with this would be great.
Thanks
__________________
2010 Ranger FX4, 5 Spd. Manual, 4:10, 32" Goodyear MTR's (Kevlar), PreKeys & Crank, BellTech 6400 Shackles, K&N drop in, Leer 100XR, Krown Rust Proofed, Line-X BedLiner (over rail), Ford Factory Bed Extender.
Last edited by NightmareFX4; 03-24-2010 at 07:28 PM.
|
|
|
|
Register and never see these ads again. |
|
03-23-2010, 12:52 PM
|
|
...............
|
|
Join Date: May 2009
Posts: 23,399
|
|
Re: Body mounts for lift # and Tire Size?
6 on the cab
6 on the bed I think
At some point ford went from 6 to 4 but I really dont recall when it was
__________________
2005 Edge
|
03-23-2010, 12:55 PM
|
|
Ford Ranger Driver
|
|
Join Date: Jan 2010
Posts: 837
|
|
Re: Body mounts for lift # and Tire Size?
I don't know about all the questions but I think 33s would look better than 32s after the 2" lift. just my opinion though
__________________
2007 Black FX4
Nitto Terra Grapplers - 285/75
Mickey Thompson Classic II's - 17"
|
03-23-2010, 01:03 PM
|
|
Ford Rangers
|
|
Join Date: Jan 2010
Posts: 208
|
|
Re: Body mounts for lift # and Tire Size?
Quote:
Originally Posted by STL
6 on the cab
6 on the bed I think
At some point ford went from 6 to 4 but I really dont recall when it was
|
Hey thanks for the quick reply.
I know there's only 6 bed bolts, and it's hard to believe there's more than 6 on the body.
I guess whats confusing me is. The kits at Summit Racing and PA show 14 in their 3" BL Kit Pics.
I might just get 16 to make sure (need to order them today). Seeing as there only $2.79 CND each. Probably end up with spares. Could be useful if one ever wears or cracks (does this happen with the BL's?).
__________________
2010 Ranger FX4, 5 Spd. Manual, 4:10, 32" Goodyear MTR's (Kevlar), PreKeys & Crank, BellTech 6400 Shackles, K&N drop in, Leer 100XR, Krown Rust Proofed, Line-X BedLiner (over rail), Ford Factory Bed Extender.
|
03-23-2010, 01:13 PM
|
|
...............
|
|
Join Date: May 2009
Posts: 23,399
|
|
Re: Body mounts for lift # and Tire Size?
Mine came with 14 I have extra 3" blocks laying in the garage
There are 2 at the front bumper area
There are 2 in the driver/passenger foot area
There are 2 behind the driver/passenger seat
__________________
2005 Edge
|
03-23-2010, 01:28 PM
|
|
Ford Rangers
|
|
Join Date: Jan 2010
Posts: 208
|
|
Re: Body mounts for lift # and Tire Size?
Quote:
Originally Posted by STL
Mine came with 14 I have extra 3" blocks laying in the garage
There are 2 at the front bumper area
There are 2 in the driver/passenger foot area
There are 2 behind the driver/passenger seat
|
Perfect thanks STL. I'm guessing they give you the extra two just in case you have a long box. I just ordered 16 just to be sure. Just maybe I can figure out a way to use the extra 4 1"BL's for the bed supports on either side of the bed, between frame and support rail (can't weld them, but maybe bolt them through there center holes / may need to mod the BL a bit though / I'll see soon enough).
Cheers
__________________
2010 Ranger FX4, 5 Spd. Manual, 4:10, 32" Goodyear MTR's (Kevlar), PreKeys & Crank, BellTech 6400 Shackles, K&N drop in, Leer 100XR, Krown Rust Proofed, Line-X BedLiner (over rail), Ford Factory Bed Extender.
|
03-23-2010, 02:19 PM
|
|
...............
|
|
Join Date: May 2009
Posts: 23,399
|
|
Re: Body mounts for lift # and Tire Size?
What do you plan to do about the bumpers? They will hang lower after you do the homemade body lift.
__________________
2005 Edge
|
03-23-2010, 02:46 PM
|
|
~+!)@(#*$&%^
|
|
Join Date: May 2009
Posts: 3,033
|
|
Re: Body mounts for lift # and Tire Size?
Hmm...never seen those 1" BL pucks before. Let us know how it goes. Do you think the OEM hardware is long enough for the extra 1"? I wouldn't mind doing a 1" BL for a little extra.
__________________
Sold:2004 XLT 4x2 Ext. Cab. 3.0 Mods: 3" spindle, AAL, shackle, 32x11.5 on 15x8s, billet grille, clear corners, flow 40 dumped, line-x, CB/PA, traction bars, lil sound system, auto up down windows
Sold:2005 XLT 4x4 Ext. Cab. 4.0 Mods: ProComp lights w/ HID swap on tabs, 32x11.5 on 15x8s, CB/PA, black out heads/corners, lil sound system, cranked t-bars, flow 40 dumped, line-x, shell, bed rug, 06+ tails, metal tail gate handle since plastic one shattered, OHC, Mustang Dome.
|
03-23-2010, 02:50 PM
|
|
...............
|
|
Join Date: May 2009
Posts: 23,399
|
|
Re: Body mounts for lift # and Tire Size?
You will defiantly need new bolts the stock ones wont be long enough
__________________
2005 Edge
|
|
|
|
03-23-2010, 03:18 PM
|
|
Ford Rangers
|
|
Join Date: Jan 2010
Posts: 208
|
|
Re: Body mounts for lift # and Tire Size?
Quote:
Originally Posted by STL
What do you plan to do about the bumpers? They will hang lower after you do the homemade body lift.
|
It's not quite a full homemade BL lift. The BL's are 1"Thick x 3"Diameter Peformance Accessories Part # BB01. See link below.
http://www.shopatron.com/products/pr....2477.0.0.0.0?
The extensions for shiter, steering, ground strap, hose are not needed with the 1"BL. As well no rad blocks needed.
Only thing I need to supply are the 12 longer bolts. Which I will be getting from Malmberg Truck and Trailer (worked there for 3 1/2 yrs so my pricing there is great / it's who ya know lol). They will be Grade 8 bolts (washers).
Rear bumper I will probably leave alone for now, and just fill in the extra 1" gap between tailgate and bumper with Blackedout Checker Plate or metal plate. Don't want my trailer hitch looking to funky.
Front Bumper is an easy fix. Elongate the bumper horn mounting holes locations upward. See Pics.
The truck in the pic has 265/75R16 and 1" torsion crank, 1" shackle lift and 1" BL with front bumper mod (fits nice) Same set up I'm after, see pics.
__________________
2010 Ranger FX4, 5 Spd. Manual, 4:10, 32" Goodyear MTR's (Kevlar), PreKeys & Crank, BellTech 6400 Shackles, K&N drop in, Leer 100XR, Krown Rust Proofed, Line-X BedLiner (over rail), Ford Factory Bed Extender.
Last edited by NightmareFX4; 03-23-2010 at 03:28 PM.
|
|
|
|
03-23-2010, 03:25 PM
|
|
...............
|
|
Join Date: May 2009
Posts: 23,399
|
|
Re: Body mounts for lift # and Tire Size?
Okay I was just checking. I didnt know if you had a plan or it was gonna be a O crap type thing. HAHAHA
__________________
2005 Edge
|
03-23-2010, 03:39 PM
|
|
Ford Rangers
|
|
Join Date: Jan 2010
Posts: 208
|
|
Re: Body mounts for lift # and Tire Size?
Quote:
Originally Posted by STL
Okay I was just checking. I didnt know if you had a plan or it was gonna be a O crap type thing. HAHAHA
|
Yep, always try lol to plan ahead. Ford Forums and Google are great stuff.
The more I look at this guys truck the more I wanna go with 33" though.
My parts are suppose to be in tomorrow yaaaaaaa, local Performance shop here.
__________________
2010 Ranger FX4, 5 Spd. Manual, 4:10, 32" Goodyear MTR's (Kevlar), PreKeys & Crank, BellTech 6400 Shackles, K&N drop in, Leer 100XR, Krown Rust Proofed, Line-X BedLiner (over rail), Ford Factory Bed Extender.
|
|
|
|
03-23-2010, 03:48 PM
|
|
Ford Rangers
|
|
Join Date: Jan 2010
Posts: 208
|
|
Re: Body mounts for lift # and Tire Size?
Quote:
Originally Posted by RangerJustin
Hmm...never seen those 1" BL pucks before. Let us know how it goes. Do you think the OEM hardware is long enough for the extra 1"? I wouldn't mind doing a 1" BL for a little extra.
|
Yep you can get em PA 1" BL'S #BB01. I'll keep ya posted for sure.
From what I've read you can re use the stock bolts from the rear cab mounts on the front cab mounts (if they arn't damaged coming out). Will only save ya from buying 2 Bolts though.
So I'm gonna just buy all 12. Once I start a job I like to finish er. No running back and forth to parts shops for me thanks. Getting all and sometimes a little more than ya need generally saves time and money (time is money lolol).
__________________
2010 Ranger FX4, 5 Spd. Manual, 4:10, 32" Goodyear MTR's (Kevlar), PreKeys & Crank, BellTech 6400 Shackles, K&N drop in, Leer 100XR, Krown Rust Proofed, Line-X BedLiner (over rail), Ford Factory Bed Extender.
Last edited by NightmareFX4; 03-23-2010 at 03:50 PM.
|
|
|
|
|
|
|
03-24-2010, 05:18 AM
|
|
Ford Rangers
|
|
Join Date: Jan 2010
Posts: 208
|
|
Re: Body mounts for lift # and Tire Size?
Quote:
Originally Posted by 2007BlackFX4
I don't know about all the questions but I think 33s would look better than 32s after the 2" lift. just my opinion though
|
Thats what I was leaning towards 33" (your right they would look better / and I could do it with this 2" lift). It's just hard to find a Pizza cutter tire for 16" rim Diameter, 7" wide. I'm used to 9.25" tire width (235/85R16) 32" Diameter. Around here with all the snow the thinner the better.
Going 33" seems to put me in the 11.25" to 10.50" tire width range.
Do you have any 33" tire suggestions in a narrower range (for factory 16" rim Diameter, 7" wide)?
I made a bad decision buying my current 245/75R16's (to small Diameter at 30.70" but tire width is ok at 9.65"). My last three sets on my 03 Jeep TJ Rubicon were 235/85R16 (32" Diameter, 9.25" tire width).
Need 33"'s in the 9.25" to 10" max width range. Any suggestions?
Thanks
__________________
2010 Ranger FX4, 5 Spd. Manual, 4:10, 32" Goodyear MTR's (Kevlar), PreKeys & Crank, BellTech 6400 Shackles, K&N drop in, Leer 100XR, Krown Rust Proofed, Line-X BedLiner (over rail), Ford Factory Bed Extender.
Last edited by NightmareFX4; 03-24-2010 at 05:28 AM.
|
|
|
|
03-24-2010, 05:53 AM
|
|
...............
|
|
Join Date: May 2009
Posts: 23,399
|
|
Re: Body mounts for lift # and Tire Size?
I was thinking this morning you may be able to use 3" bodylift bumper brakets on the rear and just do the same to the holes like on the front.
__________________
2005 Edge
|
Thread Tools |
Search this Thread |
|
|
|
|