Uhh more and more problems with this dam body lift...

STL i'm either going to get the Westin brush guard or the Aries brush guard which is pretty much identical... here is a picture of a truck with the westin one (i think) that has a 3" body lift and it worked so i think it might work without modification...

__________________
2007 Black FX4
Nitto Terra Grapplers - 285/75
Mickey Thompson Classic II's - 17"

Ranger54's was a westin.

I helped install it while others were doing other things. it just mounted to the bumper mounts

__________________

here are the instructions for mounting the Aries brush guard and it sounds like it mounts to the frame meaning it would not go up with the body lift right?

http://ariesautomotive.com/applicati...brush/3053.pdf

EDIT: Just talked to the guy who owns that yellow ranger up there and he did modify that brush guard. 3.5" bracket that not only made the brush guard go up with the body lift but also made the brush guard tighter to the truck which is why i like it so much more than any other truck i've seen with a brush guard...
all this custom fab stuff is startin to make me mad... i just want to bolt it on and call it a day...

__________________
2007 Black FX4
Nitto Terra Grapplers - 285/75
Mickey Thompson Classic II's - 17"

By reading it sounds like the one I helped install

__________________

Hm interesting. I'll talk to my local truck shop and see what he says about it. thanks for the help everyone.

__________________
2007 Black FX4
Nitto Terra Grapplers - 285/75
Mickey Thompson Classic II's - 17"

I did it by myself with hand tools in the parking lot of my apartment with no experience, just go for it. The directions are pretty simple and they have pics

__________________
Lifted and junk

Double Lifted Rangers

so if i get the right kit for my truck... say a PA BL. it will have every little thing, like a longer gas hose tube, and all the way down to every bolt, washer and extension piece i need?

__________________
2003 FX4 Off Road- 4.0L V6
fav. mod- cab clearance lights
-torsion bars maxed-

yep... as long as you're auto trans... if you're manual you need to buy a shifter extension too

__________________
2008 XLT 4x4 - GRABBER ORANGE - 4.0 V6 - 5 spd
PNW CREW

ok i know you all say to install PA 3" bodylift yourself but i dont want to...
ive called a few places and they wont do them. any one know of what type of auto place would do such a job or any one know of an auto chain in the u.s. that does BL installs?

__________________
2003 FX4 Off Road- 4.0L V6
fav. mod- cab clearance lights
-torsion bars maxed-

^^ I think most tire shops would do it. You could check a frame shop and check a custom shop as well as off-road shops.

__________________
2008 XLT 4x4 - GRABBER ORANGE - 4.0 V6 - 5 spd
PNW CREW

thanks you^^^! and also any one... i could look under my friends BL ranger tommorrow but i cant wait that long. ****PIC REQUEST OF ENGINE COMPARTMENT AFTER A 3" BODYLIFT****

__________________
2003 FX4 Off Road- 4.0L V6
fav. mod- cab clearance lights
-torsion bars maxed-

why not?

__________________

they said they dont have the knowledge to do it. i found a place... ChuxTrux here in k.c. but they want.... $750 for just install!

__________________
2003 FX4 Off Road- 4.0L V6
fav. mod- cab clearance lights
-torsion bars maxed-

^^ Once again that's gonna be about par... remember.... $90 /hr for labor and it's like an 8hr job..... just do it yourself

__________________
2008 XLT 4x4 - GRABBER ORANGE - 4.0 V6 - 5 spd
PNW CREW

fuuuuuccckkk!

__________________