Re: ChEAP 2006 Ranger 2WD 3.0V6 LIFT?
If you want cheap I would go with a 3" body lift. The coil lift will need new UCAs due to more stress on ball joints. Also you can take out those blocks in the back to get the rear end lower. You will need new u-bolts as IIRC there is not enough thread on there once the blocks are out.
__________________
Sold:2004 XLT 4x2 Ext. Cab. 3.0 Mods: 3" spindle, AAL, shackle, 32x11.5 on 15x8s, billet grille, clear corners, flow 40 dumped, line-x, CB/PA, traction bars, lil sound system, auto up down windows
Sold:2005 XLT 4x4 Ext. Cab. 4.0 Mods: ProComp lights w/ HID swap on tabs, 32x11.5 on 15x8s, CB/PA, black out heads/corners, lil sound system, cranked t-bars, flow 40 dumped, line-x, shell, bed rug, 06+ tails, metal tail gate handle since plastic one shattered, OHC, Mustang Dome.
|