Type of lift?

1AssToRisk · #1 06-23-2013, 05:02 PM

I'm looking to lift my 01 ranger. It's a 2wd 4cyl. Im also going to be getting 31" tires. Looking for something relatively cheap, but will hold up well off roading.

Any advice is appreciated

bigfisher · #2 06-23-2013, 05:14 PM

Spindles

Sent from my iPhone 5 so I can tell you to search wherever I may be

low2.3 · #3 06-23-2013, 05:20 PM

Quote:

Originally Posted by bigfisher

Spindles

Sent from my iPhone 5 so I can tell you to search wherever I may be

X2 or bodylift

1AssToRisk · #4 06-23-2013, 05:37 PM

Quote:

Originally Posted by low2.3

X2 or bodylift

Will that hold up well out in the desert of AZ?

bigfisher · #5 06-23-2013, 05:39 PM

Quote:

Originally Posted by 1AssToRisk

Will that hold up well out in the desert of AZ?

You're gonna want spindles.

Sent from my iPhone 5 so I can tell you to search wherever I may be

low2.3 · #6 06-23-2013, 05:40 PM

Quote:

Originally Posted by 1AssToRisk

Will that hold up well out in the desert of AZ?

Are you trying to make a prerunner to jump with and haul ass down whoops or just want the look and some slow trail and some sand?

BeauJCope · #7 06-23-2013, 05:44 PM

Quote:

Originally Posted by low2.3

Are you trying to make a prerunner to jump with and haul ass down whoops or just want the look and some slow trail and some sand?

Lmao

Sent from my DROID RAZR MAXX HD to your Potato III

----------

If you just want tire clearance, a body. If you need your frame to be higher for trails, spindle lift.

Sent from my DROID RAZR MAXX HD to your Potato III

low2.3 · #8 06-23-2013, 05:51 PM

Quote:

Originally Posted by BeauJCope

Lmao

Sent from my DROID RAZR MAXX HD to your Potato III

----------

If you just want tire clearance, a body. If you need your frame to be higher for trails, spindle lift.

Sent from my DROID RAZR MAXX HD to your Potato III

Idk what the lmao was about but I was seriously asking the OP because I would not just recommend any brand lift spindle to someone who plans on hauling ass through the desert and jumping the truck then having a the snout break off. Also that makes a bodylift out of the question as well. The only option that leaves is to get an actually suspension kit that can handle that kind of abuse, which is not cheap

1AssToRisk · #9 06-23-2013, 05:56 PM

I don't romp my truck. I will eventually prerun it. But I do a lot of off roading just with friends. Just screwing around nothing major.

----------

Quote:

Originally Posted by 1AssToRisk

I don't romp my truck. I will eventually prerun it. But I do a lot of off roading just with friends. Just screwing around nothing major.

So mainly moderate trails and some sand.

low2.3 · #10 06-23-2013, 05:58 PM

Quote:

Originally Posted by 1AssToRisk

I don't romp my truck. I will eventually prerun it. But I do a lot of off roading just with friends. Just screwing around nothing major.

----------

So mainly moderate trails and some sand.

Then a good set spindles like dostech should be fine

1AssToRisk · #11 06-23-2013, 05:59 PM

Quote:

Originally Posted by low2.3

Then a good set spindles like dostech should be fine

2-3 inches to fit some 31-33's?

bigfisher · #12 06-23-2013, 06:00 PM

Quote:

Originally Posted by 1AssToRisk

2-3 inches to fit some 31-33's?

3" to fit 31s

Sent from my iPhone 5 so I can tell you to search wherever I may be

low2.3 · #13 06-23-2013, 06:00 PM

Quote:

Originally Posted by 1AssToRisk

2-3 inches to fit some 31-33's?

They are 3" should clear 33's but 31's will have more room for travel

bigfisher · #14 06-23-2013, 06:01 PM

Quote:

Originally Posted by low2.3

They are 3" should clear 33's but 31's will have more room for travel

Hes gonna need more than 3" to fit 33s

Sent from my iPhone 5 so I can tell you to search wherever I may be

1AssToRisk · #15 06-23-2013, 06:02 PM

Do you think I'll rub with 33's?