First of hi everyone i,m a newbe. Im looking at doing the 1.5 inch lift leveling springs by eibach and was wondering if they will be good with a v8 up front? and will the lift throw off the caster or camber or anything? and or is there anything recomended to do also? I am planning to put braided stainless steel lines, the new springs and probably new shocks also. will the shocks need to be bigger it accomidate for the lift? and if so what do i need?

__________________
94 ranger xlt, 5.0L, AOD trans, 3.73 LS rear, B303 Cam, A9L ecu

i just put the leveling kit on my 96 and it mad the front end sit higher than the back i didnt need new brake lines but i did put new shocks on the truck all the way around i bought my kit from rough country and the told me to put at least 2 in lift shocks on with it and u will need to get an aliment when done as far as the v8 thing i dont known how that will do i got the 4.0 in mine

__________________
1996 ranger 4x4 4.0 auto working progress

How much higher is the front from the back? Do you know a good shock to run, it just a daily driver?

__________________
94 ranger xlt, 5.0L, AOD trans, 3.73 LS rear, B303 Cam, A9L ecu