I am the proud owner of a 2010 Ranger Sport 4x4 and I desperately want to put my truck on a suspension lift. I was thinking somewhere in the neighborhood of 4 inches, but the problem is that I have been totally unable to find anything, kit wise. I don't know what it is about the 2010's but parts are hard as hell to come by. If any of you have any suggestions, please let me know

By the way, I am an avid off-roader, so any other recommendations are much appreciated. Thank you!

__________________
Ole Miss - Hotty Toddy!

You have the 4" superlift and that is it...

However I am uncertain about the rear as this is the first year they have disc brakes...so not sure what complications there could be for the rear lift...

__________________
Sold:2004 XLT 4x2 Ext. Cab. 3.0 Mods: 3" spindle, AAL, shackle, 32x11.5 on 15x8s, billet grille, clear corners, flow 40 dumped, line-x, CB/PA, traction bars, lil sound system, auto up down windows
Sold:2005 XLT 4x4 Ext. Cab. 4.0 Mods: ProComp lights w/ HID swap on tabs, 32x11.5 on 15x8s, CB/PA, black out heads/corners, lil sound system, cranked t-bars, flow 40 dumped, line-x, shell, bed rug, 06+ tails, metal tail gate handle since plastic one shattered, OHC, Mustang Dome.

if anything extend some lines but that should be it.


superlift with either prekey mod or coilover conversion

__________________
Lifted and junk

Double Lifted Rangers

2010 parts are hard to come by 'cause they are so new. Give it a few years and it will be more common. I think about 99% of the stuff off of a 2006+ should fit and for certain things you could probably go back even further...

__________________
2008 XLT 4x4 - GRABBER ORANGE - 4.0 V6 - 5 spd
PNW CREW

i want a full 6" coil-over conversion suspension system with new leafs springs for the rear to come out from some big suspension company... like say Fabtech, Procomp, BDS, Superlift, Rancho, Skyjacker, etc.. just make it around $2,500 like all the other full 6" lifts for other trucks and i'd be all over that thing in a heart beat no questions asked... it'll probably come out like a month after i get the 4" superlift...

__________________
2007 Black FX4
Nitto Terra Grapplers - 285/75
Mickey Thompson Classic II's - 17"

rancho was the only company that even made a prototype which was a 4" coilover conversion lift like RCD. But no plans on producing it

__________________
Lifted and junk

Double Lifted Rangers

I don't thing they've had more than the 4" lift for like 10 years...

__________________
2008 XLT 4x4 - GRABBER ORANGE - 4.0 V6 - 5 spd
PNW CREW

i'd probably hit that up if they produced it...

__________________
2007 Black FX4
Nitto Terra Grapplers - 285/75
Mickey Thompson Classic II's - 17"

RCD is 5" and yeah the extra inch matters

__________________
Lifted and junk

Double Lifted Rangers

haha yeah but the RCD has to many problems... if it didn't i'd be getting that...

__________________
2007 Black FX4
Nitto Terra Grapplers - 285/75
Mickey Thompson Classic II's - 17"

I've got all the problems worked out though

and I've been looking for the rancho prototype truck but the pics have been deleted off of RF but if you go here

http://www.gorancho.com/photo_gallery.php
then click moab utah 2007, then booth setup there is one last pic of it

__________________
Lifted and junk

Double Lifted Rangers

aw man that looks really nice... come on rancho!! what happened?!?

just curious what were all the problems with it and how much did it cost to fix everything?

__________________
2007 Black FX4
Nitto Terra Grapplers - 285/75
Mickey Thompson Classic II's - 17"

I mean, I think a 4" lift would be sufficient. That would bring me to around the height of an f150 offroad, wouldn't it?

__________________
Ole Miss - Hotty Toddy!

I guess they decided the market wasn't big enough.

The main problem with the RCD is the coilovers that come stock are not strong enough and sag. They are only 650# and I now have 800#. Then the diff drop bracket has a bad habit of breaking, that has been reinforced. I also have extended CV shaft's but the kit comes with spacers for the stock shafts which I didn't have and later bought for my spares. There is also another bracket that some people have had break but I haven't had a problem.

__________________
Lifted and junk

Double Lifted Rangers

I have done a good bit of searchin to find site on lifting my 2010 ranger n found 2 still doin research on them http://4wheelonline.com/Products.asp...roductId=66504