Alright i have a 2010 sport 4x2. Can i put either fab tech or equivalent spindles on my truck?

__________________
2010 Ranger Sport 4dr 4.0
4x2, line-xed, 31's on AR 23's, flowmaster super 40

coil spring or torsion bar? both are available on '08+ sports.



And yes, you can spindle lift a 2010 2wd. Rear lift? I don't think anyones lifted one yet with all that new mumbo jumbo disc/roll/traction control crap back there.

__________________
'01 XLT disguised as a '03 Fx4 Level II.

t-bar

__________________
2010 Ranger Sport 4dr 4.0
4x2, line-xed, 31's on AR 23's, flowmaster super 40

just crank the bars and do add a leaf to the rear. may want to check if aal is available with all that new crap for the 2010 that Fx4wannabe01 stated is on there.

As shane said, spindle lifts are available for both types of suspensions. However, they are different parts and are not interchangeable.

Your Ranger is the old "edge" so you'll need those lift spindles, not the "xlt" spindles.

Very interesting point there... RallyTruck lifted a 2010 2WD Ranger, but I don't believe he's modified the rear much. Link: http://www.fordrangerforum.com/exhau...r-exhaust.html

__________________
2006 Ford Ranger Sport 4.0 2WD on 32x11.50R15s
-3" Doetsch Spindle Lift


Using the forum:
How to Post on the Forum
Creating a signature (do this before asking any questions)
Upload an Avatar (image of your Ranger)
How to Post Pictures on the Forum
Switch the site layout: Light Theme or Dark Theme

Things to do:
Participate in Truck of the Month
Participate in the Ranger Photo Contest
Participate in the Non-Automotive Photo Contest
Become a Site Contributor
Shop at the FordRangerForum.com Store

Well i was looking into the spindles Rallytruck took off that ranger. Then i realized that ranger was an xlt.This is the one i would need http://www.performancelifts.com/cgi-...t/FTSEDGE.html

__________________
2010 Ranger Sport 4dr 4.0
4x2, line-xed, 31's on AR 23's, flowmaster super 40

Do most people do the aal's? I want my truck to sit 1 inch higher in the front.. how would i go about doing that?

__________________
2005 Ranger Edge 2WD 3.0

The AAL are for the back...
If you have t-bars crank em, you'll get an 1-1.75" for free.
If you have spindles or coils err w/e im not the person to ask..

__________________
The {EVOLUTION} Continues
!:::My Ride:::!
[SIZE="1"]2003 FX4 Ext cab 4x4.
4.0L V6, 4.10 axel 8.8 l/s, CAI, 2.25" Exhaust w/ turbo muffler.
T-bar crank, 33x12.5 Firestone Destination A/T on 15x8 Soft 8's.
3" BL, 6400 Shackels
Red LED's:Under dash and behind Grill, 6" fogs behind grill, painted headlights and flairs
Truxxedo Lo-pro Tonneu Cover and Chrome bed rails
Mods to come:DIY bedliner.

sorry let me rephrase the question.. do most people get aal's with a 3' fabtech lift? i want my truck to sit 1' higher in the front..

__________________
2005 Ranger Edge 2WD 3.0

Not a t-bar...but here is my old XLT with 3" spindle and AAL in back:

__________________
Sold:2004 XLT 4x2 Ext. Cab. 3.0 Mods: 3" spindle, AAL, shackle, 32x11.5 on 15x8s, billet grille, clear corners, flow 40 dumped, line-x, CB/PA, traction bars, lil sound system, auto up down windows
Sold:2005 XLT 4x4 Ext. Cab. 4.0 Mods: ProComp lights w/ HID swap on tabs, 32x11.5 on 15x8s, CB/PA, black out heads/corners, lil sound system, cranked t-bars, flow 40 dumped, line-x, shell, bed rug, 06+ tails, metal tail gate handle since plastic one shattered, OHC, Mustang Dome.

Ive got a 94 but uh thought i would throw my 2 cents in...

I just took out my coils on my truck and found piece of pipe that fits flush around coil bed on the bottom and it jacked my truck up nicely for another 2.5 inches... looks nice and it was basically free... I had do some squeezing on the re-install tho .... beets those pricey rubber ones that they sell.

__________________

__-00-__Totally Resurected from the Dead__-00-__

1994 Ford XLT Extended Cab.
Automatic Transmission w/ a 4.0 6-Cylinder.
2" body Lift on Front & 3" Body Lift on Rear.
American Racing Lock-Out Hubs w/ an electronic 4 wheel drive selector switch.
32 x 11.50 x 15 BFG A.T. K.O.'s for my tires with American Racing Aluminum Rims.
New Engine, New Paint (Frame too), New Interior.... New Everything.