Hi guys, I just tried to install my 2 inch horse shoe style coil spacers. Got them in and the upper control arm will be rubbing up against the frame. Do I just need a longer control arm? Do they make such a thing? If so can I get a part number or a link to them? Thanks!

__________________
2002 xlt 2wd 4.0 sohc, duals, x pipe, tinted 15% front windows, 5 % over factory back, black tail lights and tinted 3rdbrake light, intake,poweraid throttle body spacer, black headlight housings ,billet grille, 6,000k HIDs, red street glow, red LED interior lights, kicker door speakers, alpine headunit, sony 1200 watt xplod 12 inch sub, 2 cubic foot ported box, 1000 watt kenwood amp, all lights converted to LED, 2 inch lift shackles, 3 inch coil spacers, 235/75r15 nexen mt's 15x8 soft 8s

I installed the same coil spring spacer a few months ago, and mine rubs aswell. But only on down travel is where my upper control arm rubs. Other than that I have about half an inch gap in between the two. Your suposed to install the "lift" upper control arm but even the cheeper brands will still run you 300+....

I tried to connect the ball joint into the spindle. But right now it's hitting the frame. And doesn't go into the spindle very far. Once I take the jack stands out and put everything back together will it all kind of settle to a more normal position or should I just wait til I get bigger upper control arms etc.

__________________
2002 xlt 2wd 4.0 sohc, duals, x pipe, tinted 15% front windows, 5 % over factory back, black tail lights and tinted 3rdbrake light, intake,poweraid throttle body spacer, black headlight housings ,billet grille, 6,000k HIDs, red street glow, red LED interior lights, kicker door speakers, alpine headunit, sony 1200 watt xplod 12 inch sub, 2 cubic foot ported box, 1000 watt kenwood amp, all lights converted to LED, 2 inch lift shackles, 3 inch coil spacers, 235/75r15 nexen mt's 15x8 soft 8s