05 under and 07 and up keys? difference.

Eagle · #1 09-23-2011, 08:15 PM

which ones will provide the most lift. i think in 07 they reindexed them

Eagle · #2 09-25-2011, 08:52 PM

anybody know

SB03Ranger · #3 09-25-2011, 09:01 PM

Need a lil more info man. not sure what our asking, are you asking if the t-keys off an 05 will be higher than those off a 07?

Eagle · #4 09-25-2011, 09:24 PM

will 07 keys lift more than 04 keys.. i read where they were reindexed in 07 but can't remember if they provide more lift or not

cacher · #5 09-25-2011, 11:13 PM

Ask a local seasoned locksmith. When I was locksmithing I remember you could cut one of the older five pin ford keys on a single type of blank, and use it for the door, trunk, and igniton, by putting the ignition cuts on one side, and the door cuts on the flip side. It works because they are double sided cut keys going into an older lock that had pins on only one side of the lock, hence you can "flip" the double sided key for those years, and locks and the key would work. You also may want to google "ford key tips and tricks".

STL · #6 09-26-2011, 01:43 AM

Quote:

Originally Posted by cacher

Ask a local seasoned locksmith. When I was locksmithing I remember you could cut one of the older five pin ford keys on a single type of blank, and use it for the door, trunk, and igniton, by putting the ignition cuts on one side, and the door cuts on the flip side. It works because they are double sided cut keys going into an older lock that had pins on only one side of the lock, hence you can "flip" the double sided key for those years, and locks and the key would work. You also may want to google "ford key tips and tricks".

Not what he is asking

The torsion bar keys is what he is talking about. Any key 2006 and older is bigger then the 07 and up.

2004xlmiller · #7 09-26-2011, 01:56 AM

Quote:

Originally Posted by cacher

Ask a local seasoned locksmith. When I was locksmithing I remember you could cut one of the older five pin ford keys on a single type of blank, and use it for the door, trunk, and igniton, by putting the ignition cuts on one side, and the door cuts on the flip side. It works because they are double sided cut keys going into an older lock that had pins on only one side of the lock, hence you can "flip" the double sided key for those years, and locks and the key would work. You also may want to google "ford key tips and tricks".

lmao!

Eagle · #8 09-26-2011, 06:57 AM

Quote:

Originally Posted by STL

Not what he is asking

The torsion bar keys is what he is talking about. Any key 2006 and older is bigger then the 07 and up.

thanks