|
06-20-2011, 05:57 PM
|
|
Like the Forums
|
|
Join Date: Feb 2011
Posts: 37
|
|
Lift spindles and shackels
ive seen where people have lifted the front of their rangers with spindle lifts. ( http://www.prerunnermaniac.com/Preru...-Install/4.php )
what would be the best (and cheapest) way to lift the rear? shackles?
__________________
2005 ford ranger edge 2wd supercab
Last edited by Andygx777; 06-20-2011 at 06:16 PM.
|
Register and never see these ads again. |
|
06-20-2011, 05:59 PM
|
|
slingin' mud to the sky!
|
|
Join Date: Feb 2011
Posts: 1,252
|
|
Re: Lift spindles and shackels
blocks under the rear springs
|
06-20-2011, 06:23 PM
|
|
Almost ******
|
|
Join Date: Mar 2011
Posts: 7,466
|
|
Re: Lift spindles and shackels
blocks, shackles, add a leaf, full replacement spring packs.
cheapest >>>>>>>>>>>>>>>>>>>>most expensive
|
06-20-2011, 06:26 PM
|
|
Like the Forums
|
|
Join Date: Feb 2011
Posts: 37
|
|
Re: Lift spindles and shackels
Quote:
Originally Posted by doyouquaxu
blocks, shackles, add a leaf, full replacement spring packs.
cheapest >>>>>>>>>>>>>>>>>>>>most expensive
|
do you mean body lift blocks? are shackels durable?
__________________
2005 ford ranger edge 2wd supercab
|
06-20-2011, 06:35 PM
|
|
Almost ******
|
|
Join Date: Mar 2011
Posts: 7,466
|
|
Re: Lift spindles and shackels
no, lift blocks go between the axle and the spring. you have shackles on your truck now... they wouldn't be on there if they weren't durable. belltech 6400 shackles (made as chevy lowering shackles) work just fine for a cheap, simple lift.
|
06-20-2011, 06:44 PM
|
|
Like the Forums
|
|
Join Date: Feb 2011
Posts: 37
|
|
Re: Lift spindles and shackels
Quote:
Originally Posted by doyouquaxu
no, lift blocks go between the axle and the spring. you have shackles on your truck now... they wouldn't be on there if they weren't durable. belltech 6400 shackles (made as chevy lowering shackles) work just fine for a cheap, simple lift.
|
which hole would you bolt the leaf into to get 3 inch lift?
these? http://www.amazon.com/Belltech-6400-Shackle-Kit/dp/B000CIKAPA
__________________
2005 ford ranger edge 2wd supercab
|
06-20-2011, 09:02 PM
|
|
Needs moar chrome....
|
|
Join Date: Dec 2010
Posts: 1,318
|
|
Re: Lift spindles and shackels
They will give you 2 in not 3. If you want 3 go for aal and shackles, what i will be running in the next week or two. Ill be getting 3 1/2 in of lift from it. Also you do need to get new shocks for the back unlike the front
__________________
2001 Mazda B-3000 CabPlus "FX2 Off Road"| 3.0 | 5 SPD | 3 In Spindle Lift | Belltech Shackles | UltraGauge |Alpine Head / 10" Kicker Setup | Air Box Mod | Add-A-Leaf| Thrush Welded B4 Rear Wheel | Kobalt Box | Cobra 19 DX IV | Custom PA Speaker | Front/Rear Tow Receiver | 2X Aux Lights | Hideaway Strobes | Back Rack Safety Rack | Amber LED Strobes | Blue LED Strobes | 265/75/R16 General Grabber AT2's
Quote:
Originally Posted by Clinton
I like little girls...........
|
RIP Jason
|
06-20-2011, 09:56 PM
|
|
Almost ******
|
|
Join Date: Mar 2011
Posts: 7,466
|
|
Re: Lift spindles and shackels
the back is typically higher on trucks in the back than the front, so 2" of lift will probably level it out nicely. yes, bolt it to the hole farthest from the bushings
|
|
|