|
06-15-2011, 06:19 PM
|
|
Ford Truck Driver
|
|
Join Date: Jan 2011
Posts: 97
|
|
37x12.50x20
If i bought i 4 inch superlift and a 3" body then cranked the t bars could i clear 37x12.50x20? its just going to be for the street. thanks guys
__________________
1999 ford ranger x cab 4x4 flow masters 3" rear blocks 31x10.50 bfg ats. 2 12" kicker cvx's, 6.22 cubic foot ported box, hifonics 1500 watt class d mono wired 1ohm
|
Register and never see these ads again. |
|
06-15-2011, 06:26 PM
|
|
slut life
|
|
Join Date: Oct 2010
Posts: 3,031
|
|
Re: 37x12.50x20
its gonna be tight, i think 35s would be a better fit, not to mention your gonna have to gear it and its going to wreak havoc on the drive terrain. the fitment would probably be close...
__________________
99 extended cab, 4.0, auto, 33s, 4x4 lifted with some stuff done
98 2wd 2.5, 5 speed, dropped with some stuff done
|
06-15-2011, 06:36 PM
|
|
Ford Truck Driver
|
|
Join Date: Jan 2011
Posts: 97
|
|
Re: 37x12.50x20
dam i was hoping everything would work. i just seen a couple rangers setup like that and loved the look but i dont wanna have to always be working on either.
__________________
1999 ford ranger x cab 4x4 flow masters 3" rear blocks 31x10.50 bfg ats. 2 12" kicker cvx's, 6.22 cubic foot ported box, hifonics 1500 watt class d mono wired 1ohm
|
06-15-2011, 06:38 PM
|
|
Livin low...Ridin high
|
|
Join Date: Mar 2011
Posts: 2,210
|
|
Re: 37x12.50x20
^^^ hes right. but personally i mean whatever you want to do is best i just wanna see them things mounted lol. and then see the threads about loss of power/ the wholes transmission lol. but still......DDDDDOOOOO IIIITTTT
|
06-15-2011, 06:39 PM
|
|
Ford Truck Driver
|
|
Join Date: Jan 2011
Posts: 97
|
|
Re: 37x12.50x20
what if i found a rcd lift would the measurements be the same. well what im asking is would they fit and not be as bad on the cv's and ball joints and all i was planning on puttin 4.88 gears in the rear end and front to pull em.
__________________
1999 ford ranger x cab 4x4 flow masters 3" rear blocks 31x10.50 bfg ats. 2 12" kicker cvx's, 6.22 cubic foot ported box, hifonics 1500 watt class d mono wired 1ohm
|
06-15-2011, 06:41 PM
|
|
Livin low...Ridin high
|
|
Join Date: Mar 2011
Posts: 2,210
|
|
Re: 37x12.50x20
Quote:
Originally Posted by 95fordman
what if i found a rcd lift would the measurements be the same. well what im asking is would they fit and not be as bad on the cv's and ball joints and all i was planning on puttin 4.88 gears in the rear end and front to pull em.
|
i think 37s would fit with some trimming but i mean buddy if you want to do it. if your gonna be happy, do it.
|
06-15-2011, 06:45 PM
|
|
slut life
|
|
Join Date: Oct 2010
Posts: 3,031
|
|
Re: 37x12.50x20
yeah your gonna have epic cv failure more than likely... the rear end should push it if you have the 8.8 for a bit at least, but those are biiiiiig tires. the fisrt time you take it mudding or wheeling expect to limp home or get towed. i think it would look legit minus the 20s, but thats a lot of stress for the stock front end and tranny.
also you might need deeper gears randy has 4.88s and 35s, i would say possibly 5.13s.
__________________
99 extended cab, 4.0, auto, 33s, 4x4 lifted with some stuff done
98 2wd 2.5, 5 speed, dropped with some stuff done
|
06-15-2011, 06:47 PM
|
|
happiness is a warm gun
|
|
Join Date: Jan 2011
Posts: 689
|
|
Re: 37x12.50x20
My dream is to do a suspension + body lift on 37's and do a diesle swap but that's a little out of my budget at the moment. But you should do it for sure
__________________
1997 ext cab STX 4.0L 4x4
3 inch body lift withwith BFG all terrain's
Kenwood headunit, kicker 6x8 speakers all around, and 2 12" rockford P3's with a 900 watt rms amp.
35w 8000k HID headlights
projector fogs with 8000k HID's
warn manual hubs
|
06-15-2011, 07:11 PM
|
Banned
|
|
Join Date: Apr 2010
Posts: 1,030
|
|
Re: 37x12.50x20
37s are pushing it and your still gunna be looking at doing alot of trimming, pluc when you hit a bump prob gunna take your fender off. As stated about its going to wreck havoc on the suspension. Major areas thats going to contact is the front bumper/ valance and the front cab corner.
|
06-15-2011, 07:22 PM
|
|
Ford Truck Driver
|
|
Join Date: Jan 2011
Posts: 97
|
|
Re: 37x12.50x20
i dont off road really just down a red clay road down to the river thats it. i mean i have thought about the stress on the tranny and cv's to. the only time it will be 4 wheel drive is when we get some ice which is once maybe twice a year. im prolly just going to do 35s with 4.56s. yall got me scared now hahaha.
----------
this is one with 37s lust 4 inch superlift with 3" bl. love it
----------
__________________
1999 ford ranger x cab 4x4 flow masters 3" rear blocks 31x10.50 bfg ats. 2 12" kicker cvx's, 6.22 cubic foot ported box, hifonics 1500 watt class d mono wired 1ohm
|
06-15-2011, 07:23 PM
|
Banned
|
|
Join Date: Apr 2010
Posts: 1,030
|
|
Re: 37x12.50x20
Even with out engaging 4x4 37s are some big rubber to be spinning down the road. Yeah I think you would be better off with some 35s for street driving.
|
06-15-2011, 07:26 PM
|
|
slut life
|
|
Join Date: Oct 2010
Posts: 3,031
|
|
Re: 37x12.50x20
35s with 4.88s thats a good combo, 4.56 is good for 33s.
__________________
99 extended cab, 4.0, auto, 33s, 4x4 lifted with some stuff done
98 2wd 2.5, 5 speed, dropped with some stuff done
|
06-15-2011, 07:30 PM
|
|
Ford Truck Driver
|
|
Join Date: Jan 2011
Posts: 97
|
|
Re: 37x12.50x20
----------
yeah you aint talkin but about a inch in height gain any way so yeah ima go with 35s my buddy has a 05 chevy 1500 with 37s a helpes him put them things on them tires a HEAVY!!!!!!!!
__________________
1999 ford ranger x cab 4x4 flow masters 3" rear blocks 31x10.50 bfg ats. 2 12" kicker cvx's, 6.22 cubic foot ported box, hifonics 1500 watt class d mono wired 1ohm
|
06-15-2011, 07:44 PM
|
|
Ford Ranger Owner
|
|
Join Date: Jan 2011
Posts: 68
|
|
Re: 37x12.50x20
The 35's are heavy as hell too, I'm already running everything you plan on doing and roatating the tires is a bitch. But I haven't had any issues with any of the suspension, cv axels, or tranny.
35x12.5-20...
__________________
Murdered out 09' Ranger SLT Supercab 4x4 4.0 V6: 10" of lift...And blah blah blah.
|
06-15-2011, 07:52 PM
|
|
slut life
|
|
Join Date: Oct 2010
Posts: 3,031
|
|
Re: 37x12.50x20
do your tires rub ever?
__________________
99 extended cab, 4.0, auto, 33s, 4x4 lifted with some stuff done
98 2wd 2.5, 5 speed, dropped with some stuff done
|
|
|