Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #46  
Old 06-17-2011, 10:41 AM
95fordman 95fordman is offline
Ford Truck Driver
 
Join Date: Jan 2011
Posts: 97
Default Re: 37x12.50x20

did you shorten your axle any?
__________________
1999 ford ranger x cab 4x4 flow masters 3" rear blocks 31x10.50 bfg ats. 2 12" kicker cvx's, 6.22 cubic foot ported box, hifonics 1500 watt class d mono wired 1ohm
Reply With Quote
  #47  
Old 06-17-2011, 10:54 AM
cdawall cdawall is offline
Jeep recovery vehicle
 
Join Date: Jan 2010
Posts: 2,197
Default Re: 37x12.50x20

Nope and I'm running one of the less want low pinion d30s
__________________
'05 Ranger Edge SAS'd, 5.38's, D60/D60U, 38.5" TSL SX's, October 2012 TOTM, build thead
Reply With Quote
  #48  
Old 06-17-2011, 05:35 PM
95fordman 95fordman is offline
Ford Truck Driver
 
Join Date: Jan 2011
Posts: 97
Default Re: 37x12.50x20

that what the one i have is. drives from the drivers side. ok this question is going to seem stupid but say a bought coil buckets for a 77 ford bronco and fabed them to fit on my ranger and used f 250 shock mounts for a longer shock. how would you lift it? would you just buy ford bronco coils or just buy a ford bronco lift kit with out shocks? also im wanting to do a 8" suspension to eliminate any body lift would i have to custom make drive shafts? i am a certified pipe welider carbon steel and stainless so fabing is not a issue.
__________________
1999 ford ranger x cab 4x4 flow masters 3" rear blocks 31x10.50 bfg ats. 2 12" kicker cvx's, 6.22 cubic foot ported box, hifonics 1500 watt class d mono wired 1ohm
Reply With Quote
  #49  
Old 06-17-2011, 07:07 PM
cdawall cdawall is offline
Jeep recovery vehicle
 
Join Date: Jan 2010
Posts: 2,197
Default Re: 37x12.50x20

my rear is stock no idea how yours will do the front mine was a custom fab.

for coils just order bronco coils or even V8 ZJ (grand cherokee) coils
__________________
'05 Ranger Edge SAS'd, 5.38's, D60/D60U, 38.5" TSL SX's, October 2012 TOTM, build thead
Reply With Quote
  #50  
Old 06-18-2011, 06:56 AM
95fordman 95fordman is offline
Ford Truck Driver
 
Join Date: Jan 2011
Posts: 97
Default Re: 37x12.50x20

ok if i put 6 inch bronco coils in the front, and then put 6 inch bronco leafs in the rear, whould it be be higher than a ranger 6 inch lift?
what im asking is when you buy a ranger six inch lift it states recomended tire size 33 12.50 15. and the bronco states recomended tire size 36 12.50 15. so if i swaped out my whole suspension with a broncos i wound have the height of a bronco right?
__________________
1999 ford ranger x cab 4x4 flow masters 3" rear blocks 31x10.50 bfg ats. 2 12" kicker cvx's, 6.22 cubic foot ported box, hifonics 1500 watt class d mono wired 1ohm
Reply With Quote
  #51  
Old 06-18-2011, 03:47 PM
cdawall cdawall is offline
Jeep recovery vehicle
 
Join Date: Jan 2010
Posts: 2,197
Default Re: 37x12.50x20

oit will be taller than a bronco. it will also ride like a mac truck. V8 ZJ coils around 8" will be nice as for the rear leafs get ranger lift leafs.
__________________
'05 Ranger Edge SAS'd, 5.38's, D60/D60U, 38.5" TSL SX's, October 2012 TOTM, build thead
Reply With Quote
  #52  
Old 06-20-2011, 09:31 AM
95fordman 95fordman is offline
Ford Truck Driver
 
Join Date: Jan 2011
Posts: 97
Default Re: 37x12.50x20

will it be higher than a stock ranger with 6"s of lift? or will it be as high as a bronco with 6"s of lift?
__________________
1999 ford ranger x cab 4x4 flow masters 3" rear blocks 31x10.50 bfg ats. 2 12" kicker cvx's, 6.22 cubic foot ported box, hifonics 1500 watt class d mono wired 1ohm
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
For Sale: CHECKING INTEREST BRAND NEW BFG KM2 37x12.5x20 0 Miles Ohio/Indiana Ranger01 Exterior Parts 0 01-02-2011 04:19 PM