I recently put a leveling kit on my truck and It looks awesome, I love it. It consisted of coil spacers for the front and add a leafs for the back. It looks really good but the rear end of my truck sits a wee little bit lower than the front. Its not causing any problems by any means but I want the back to be at least level, if not sit a little higher than the front. Ive done some looking and the smallest lift blocks that I can find are 1.5" and I think that will lift it a little too high. I was contemplating taking the add a leafs out and going for 2" lift blocks but I really dont want to do that either. Is there any cheap and easy ways to get another 3/4"-1" of rear lift?

Leave the front sitting higher than the back. Keep the cali lean

yeeeeAAAAA budddyyyy

__________________
Grey 2000 ford ranger xlt 4 cylinder
tinted windows black rims falken rocky mountain tires

dont lift the bed higher than the front, it looks really goofy man.

__________________
YZ the way to be!
The Brotherhood!

Mods to come: Camburg entry 6.0 system. FiberwerkX Fenders and bedsides. Tube bumper.
R.I.P. Jeff Ashton. 1992-2011

Why not he wants to look at ground

__________________
Grey 2000 ford ranger xlt 4 cylinder
tinted windows black rims falken rocky mountain tires

not exactaly cheap but adjustable load leveling shops

__________________
2001 Ranger Edge Super Cab
4.0L SOHC 4.10 l/s Rear
3" Summit Body Lift
15x10 D Window Rims 3.76" Backspace
33x12.50 Goodyear Duratracs

i love the factory rake lol

__________________
Ford Ranger Edge Supercab, 2004 3.0 Auto, 2WD, 4.10 Axle 31x10.5x15 BF Goodrich All Terrain T/A KO's


My Truck Is My Mountain Bike's Ride!

Class III hitch, Rhino Bedliner, Almost Maxed T-Bar Crank, Tuff Country Add A Leaf, Custom Low Anchor Points, OEM ('99) Tow Hooks, Pro Comp Offroad Lights , Mustang Dome Light, Clear Corners, Slim Toolbox, Blinker Mod,Cargo Brake Light Mod,Expo Lighted Visors, Ultra Silverstar heads/fogs, Fog/high mod, Reverse/switched lights, Bike Fork Mounts

i hate it my truck rakes bad haha but i dont want to drop the rear. My tbars are maxed and its rakin

__________________
2001 Ranger Edge Super Cab
4.0L SOHC 4.10 l/s Rear
3" Summit Body Lift
15x10 D Window Rims 3.76" Backspace
33x12.50 Goodyear Duratracs

im up 4 inches in the back which is perfect for me,

__________________
Ford Ranger Edge Supercab, 2004 3.0 Auto, 2WD, 4.10 Axle 31x10.5x15 BF Goodrich All Terrain T/A KO's


My Truck Is My Mountain Bike's Ride!

Class III hitch, Rhino Bedliner, Almost Maxed T-Bar Crank, Tuff Country Add A Leaf, Custom Low Anchor Points, OEM ('99) Tow Hooks, Pro Comp Offroad Lights , Mustang Dome Light, Clear Corners, Slim Toolbox, Blinker Mod,Cargo Brake Light Mod,Expo Lighted Visors, Ultra Silverstar heads/fogs, Fog/high mod, Reverse/switched lights, Bike Fork Mounts

you mean compared to the front?

__________________
2001 Ranger Edge Super Cab
4.0L SOHC 4.10 l/s Rear
3" Summit Body Lift
15x10 D Window Rims 3.76" Backspace
33x12.50 Goodyear Duratracs

It looks goofier having my bed sit lower than it will with it sitting higher. Before I lifted it or did any leveling at all, my bed sat quite a bit higher than the front of my truck. I dont want the bed to necessarily sit higher than the cab, just more level.

110% agreed

yeah lol its actually more like 3.5 haha

__________________
Ford Ranger Edge Supercab, 2004 3.0 Auto, 2WD, 4.10 Axle 31x10.5x15 BF Goodrich All Terrain T/A KO's


My Truck Is My Mountain Bike's Ride!

Class III hitch, Rhino Bedliner, Almost Maxed T-Bar Crank, Tuff Country Add A Leaf, Custom Low Anchor Points, OEM ('99) Tow Hooks, Pro Comp Offroad Lights , Mustang Dome Light, Clear Corners, Slim Toolbox, Blinker Mod,Cargo Brake Light Mod,Expo Lighted Visors, Ultra Silverstar heads/fogs, Fog/high mod, Reverse/switched lights, Bike Fork Mounts

We call it the mendo sag up here in nor-cal.

Anyways if its only 3/4 of an inch its gotta be sitting fairly level already. The 1.5" blocks sound like the best bet for you. Have you measured the front and back to see exactly how much higher the front sits?

__________________
2003 Edge 4x4 4.0, 5 speed. Parting it out

For Sale: Superlift http://www.summitracing.com/parts/SLF-K358/

Check autozone I think they still have the cheapy 1" blocks. Or hit ebay bet they have whatever size you want

__________________
'05 Ranger Edge SAS'd, 5.38's, D60/D60U, 38.5" TSL SX's, October 2012 TOTM, build thead