Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #1  
Old 02-12-2011, 09:36 AM
RMZpilot RMZpilot is offline
Like the Forums
 
Join Date: Feb 2011
Posts: 45
Default iBeam alignments - leveling

1990 Ranger

Picked up some coil springs that are 2" longer. I had read so far is that these will bolt in, get it aligned and it should be fine as far as brake line length, alignment etc...

I call a couple places to get it done, one tells me I need new brake lines, pitmanarm, camber kit and the other tells me "there is no camber adjustment on ibeam rangers". You cant adjust camber on ibeam rangers? Im guessing the guy that said there is no camber adjustment is plain wrong.

Could somebody shed some light on this. Whats the best way to get the front end on this little thing up a little? Im not looking to run 33s, 29" is the tire height Im looking at.
Reply With Quote
  #2  
Old 02-12-2011, 09:54 AM
blkranger231 blkranger231 is offline
FOXTROT YANKEE LIMA
 
Join Date: Apr 2010
Posts: 1,059
Default Re: iBeam alignments - leveling

you may need to mess with the brake lines a bit depends each one is diff, as for camber BS go to napa and get some camber eccentrics, and I dont see why you would need a new pitman arm. I suggest a diff shop then the 2 you asked. You may bot be able to get it "perfect" but just keep a eye on it

http://www.4wheelparts.com/Lift-Kits...NGER#ancResult
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
ibeam - spindle swap sbristow84 General Ford Ranger Discussion 2 02-09-2011 09:27 AM
Leveling Help 94xltklingler Lifted Suspension 0 12-31-2010 11:44 AM
Leveling kit please help bfoster133 Lifted Suspension 7 12-26-2010 07:40 PM
Leveling out Dabiscuit Lifted Suspension 1 11-06-2010 05:05 PM
Leveling out kansasboy91 Exterior Tech 0 09-06-2010 12:01 AM