Re: RC 5in lift
Pre 2003, 4wd Rangers has 11.25” rotors. Mid 2003, Ford switched to 12” rotors on the 4wds
I haven’t looked into the rough country kit too closely, but judging by your question, it sounds like they are only supporting one rotor size. RCD did this as well (forced everyone to run 11.25” rotors). My superlift knuckles have caliper bracket bolt holes for both sizes.
If this is the case, you will need to get the proper size rotors from the correct year truck (2004 or newer if you need a 12” or 1998-2002 if you need the 11.25”). Calipers will be the same. I’m not sure if the caliper brackets will need to change or not (I don’t know if ford changed the caliper bracket or the bolt holes in the knuckles when they switched to 12” rotors).
Sent from my iPhone using Tapatalk
__________________
2002 Ford Ranger XLT 4x4, ext. cab, 4.0L v6
Superlifted 33x12.5 Duratracs
1995 Ford Ranger STX 4x4 ext. cab 4.0l v6 SOLD
|