Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Thread Tools Search this Thread

Old 07-29-2018, 09:37 PM
Cooper_G Cooper_G is offline
Learning to use the forums
Join Date: May 2018
Posts: 6
Default Upper control arm help.

Hows it going everyone. I picked up a 2wd 98 ranger recently, it has a 5.5 inch coil lift from the previous owner with stock upper control arms. As you could imagine my upper ball joints are getting pretty tweaked and im unable to get my camber to an acceptable level. I was wondering if there are any UCAs out there that will work without spending 5-600 bucks on fabtech etc... looking for an affordable fix. Any help would be much appreciated. Thanks! -Cooper

Sent from my Z982 using Tapatalk
Reply With Quote
Old 07-29-2018, 11:14 PM
Undrstm8ed Undrstm8ed is offline
Habenae Est Dominatus
Join Date: Apr 2013
Posts: 1,879
Default Re: Upper control arm help.

Check out BTF, But to find something for the "Cheap" and quality too... negative unless you buy it preowned.

When you find yourself with 5" lift kits, you're no longer in the $25-50 fixes for shit like that. Sadly, to do it "right" you may have to "invest" in your truck and self.

My Build Pg. Threads
+ 93' Ranger Overlanding Build
+ 94' Ranger Bed Overlanding Trailer Build
+ 12 North Industries ~ I Support
Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar Threads
Thread Thread Starter Forum Replies Last Post
upper control arm... rangergambler General Ford Ranger Discussion 9 07-12-2018 12:35 PM
Upper control arm Tmudder Exterior Tech 2 07-04-2017 09:04 AM
Upper Control Arm jschaf024 Suspension Tech 0 06-15-2017 11:59 AM
Upper control arm Tmudder Suspension Tech 9 02-25-2015 11:52 AM
upper control arm sherlock9710 Suspension Tech 0 03-26-2012 05:17 PM